说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 被动连续锁模
1)  passive continuous wave modelocking
被动连续锁模
1.
Bragg mirror type of semiconductor saturable absorption mirror near 800 nm was made first time in China, by which we realized passive continuous wave modelocking for Arion laser pumped Ti-sapphire laser.
用布拉格反射镜型半导体可饱和吸收镜作为自启动装置,我们实现了氩离子激光器泵浦的钛宝石激光器被动连续锁模,获得了连续锁模脉冲序列,重复频率在100 MHz到200 MHz。
2.
By such principle,a new type of surface-state semiconductor saturable absorption mirror was introduced,with which we realize passive continuous wave modelocking of diode-end-pumped Nd:YAG laser.
依此原理,制作了一种新型的表面态型半导体可饱和吸收镜,用其作为被动锁模吸收体,实现了半导体端面泵浦Nd:YAG激光器被动连续锁模
2)  CW mode locking
连续锁模
1.
The lasing oscillation threshold was 35 mW and CW mode locking threshold was 0.
LD抽运全固体Nd∶YVO4激光器在连续锁模状态运转下获得了高达1GHz的重复频率。
3)  CW mode-locking
连续锁模
1.
Continuous wave (CW) and CW mode-locking operations were achieved for the first time by suppressing the self-Q-switch.
首次在该晶体的激光器中成功压制了自调Q的趋势,实现了连续光运转和连续锁模运转,并通过腔内色散补偿获得了飞秒级锁模脉冲;理论分析了两种常用腔型中该晶体的热透镜效应及其调整方法;实验观察了热效应对激光光束质量影响,提出减小温差是改善光束质量的关键。
4)  passive mode-locking
被动锁模
1.
By analysing energy level structure of BDN dye in combination with rate equations, the authors point out the possibility of realizing passive mode-locking by using BDN dye film with relaxation time of ground state in nanosecond magnitude.
在理论上 ,通过对BDN能级结构的分析并结合速率方程组 ,指出基态驰豫时间为ns量级的BDN染料片实现被动锁模的可能性 。
2.
The experimental observation of blue-chirped pulses for passive mode-locking is found to be due to the different contributions of gain and absorber media to the calorific-effective parameters change.
讨论了多量子阱被动锁模半导体激光器中光脉冲啁啾的产生机制和变化规律,在实验中得到被动锁模蓝移啁啾脉冲,它主要是由于增益介质和饱和吸收体的热效应参数所致的结果,这为设计出通信波长(1。
3.
The passive mode-locking operation of a flash-lamp pumped Nd∶YAG laser was achieved by inserting the nc-Si-SiNx film as the saturable absorber i.
06μm激光的被动锁模运转。
5)  passively mode-locking
被动锁模
1.
Optical short-pulsed lasers offer a broad range of applications in various fields,such as Q regulation,radio saturation and absorption lens,passively mode-locking and carbone monotubes,etc.
目前发展的用于脉冲掺铒光波导激光器的技术主要有:调Q技术、半导体饱和吸收镜被动锁模技术以及带尾纤的碳纳米管(CNTs)饱和吸收被动锁模技术。
6)  passively mode-locked
被动锁模
1.
Femtosecond passively mode-locked Er~(3+)-doped fiber ring laser;
飞秒被动锁模环形腔掺Er~(3+)光纤激光器
2.
Study on passively mode-locked erbium-doped fiber laser by means of NALM;
利用NALM结构的被动锁模掺铒光纤激光器的研究
3.
A passively mode-locked fiber ring laser with a small segment of Er3+-doped fiber as gain medium,pumped by stable 976 nm laser diode(LD) and mode-locked by the nonlinear polarization rotation(NPR) technique,was successfully achieved.
用性能稳定的976 nm激光二极管(LD)作为抽运光源,利用非线性偏振旋转(NPR)作为可饱和吸收体,实现了环形腔结构的被动锁模掺Er3+光纤激光器。
补充资料:

lock

   用以关住某个确定的空间范围或某种器具的安全装置 。锁几乎与私有制同时诞生。早在公元前3000年的中国仰韶文化遗址中,就留存有装在木结构框架建筑上的木锁。东汉时,中国铁制三簧锁的技术已具有相当高的水平。三簧锁前后沿用了1000多年 。18世纪初由英国人 D. 波特发明凸轮转片锁。其钥匙编号由三簧锁的20多种发展到80多种。19世纪中叶 ,欧洲制造商在凸轮转片锁和三簧锁的基础上改制成滑动转片锁,其钥匙编号可达1600种 。1848年 ,美国人 L.耶尔发明采用圆柱形销栓的弹子锁,该锁已成为世界上使用最普遍的锁。现代弹子锁的结构又有新的发展,出现双向、三向、四向弹子结构,以及平面、双面、多面、双排双面、多排多面弹子结构和组合弹子结构,从而大大提高锁的保密性能,使锁的编号由原有的2500种通过“向”、“面”的变化达到百万种。20世纪70年代,随着微电子技术的应用,出现了磁控锁、声控锁、超声波锁、红外线锁、电磁波锁、电子卡片锁、指纹锁、眼球锁、遥控锁等。这些锁具有机械结构所无法比拟的高保密性能。现代锁还可在特定的系统中、按设定的逻辑关系实现系统的程序控制。现代锁可按材质、用途、有无钥匙、安全性能和结构进行分类。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条