1) orthogonal static stresses
正交静应力
1.
A general dispersion equation for Lamb waves in an arbitrary direction was derived in an isotropic hyperelastic plate subjected to orthogonal static stresses with wavelet analysis.
运用部分波分析法(或子波分析)理论推导了在正交静应力下,板中任意方向的Lamb波的频散方程,给出了任意方向Lamb波波速、正交静应力和频率之间的关系。
2) Direct stress
正交应力
3) static effective normal stress
静有效正应力
1.
Under a cyclic loading with constant amplitude strain controlled by constant strain rate, dynamic strength of frozen silt increases at first with increase of static effective normal stress, reaches the peak strength at the static effective normal stress of 7～8 MPa and then decreases with further increase of static effective normal stress.
在恒应变速率增长的等应变幅动力模式下，冻结粉土的动强度最初随静有效正应力增大而增加；在后者为７～８ＭＰａ时，动强度达到峰值；以后随着静有效正应力的继续增大，动强度趋于减小。
4) orthogonal stress mode
正交应力模式
5) static stress
静应力
1.
Research on the relationship between orthogonal static stresses and Lamb wave velocity in plate;
板中正交静应力与Lamb波波速关系探讨
2.
The paper describes the finite element calculation of static stress for 3# semi-open housing of open-train mill through ANSYS.
本文应用ANSYS对某横列半开式轧机3#牌坊进行静应力的有限元计算,牌坊内应力的变化水平为后续钻空改造方案提供理论依据,该计算方法可为类似的计算借鉴。
3.
Starting from loading conditions of lifting steel wire ropes, this paper makes more detailed analysis on the static stresses of the steel wire ropes, pointing out that the maximum loading point is at the point of tangency of steel wire rope's pendulous section and the hoisting sheave.
从提升钢丝绳的受力情况入手 ,对钢丝绳静应力做了较详细的分析 ,指出钢丝绳在悬垂段与天轮切点处为最大受力
6) dynamic and static stress
动静应力
1.
In order to guide blasting design and reduce the adverse effect of blasting on backfill, the dynamic and static characteristics of backfill are studied, the propagating laws of blasting waves are analyzed on the filling interface and the dynamic and static stresses of backfill are calculated at different mining heights of high-stope pillar.
为了指导矿柱爆破设计、降低爆破对充填体的破坏效应 ,试验研究了充填体动静力学特性 ,分析了爆炸应力波在充填体界面的传播规律 ,计算了爆破动载下高阶段矿柱不同开采高度充填体动静应力。
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条