1) Pore fluid distribution
孔隙流体分布
2) pore volume distribution
孔隙体积分布
1.
Advance on the study of physical and chemical properties of silica surface was introduced,including pore volume distribution,characterization by IR and 1H NMR spectrum and adsorption by water.
详细阐述了国外近几年在此方面的一些研究成果,包括孔隙体积分布、红外光谱和1HNMR谱对白炭黑表面及吸附水的表征研究,结果表明,它们之间相互关联,其中孔隙体积分布是决定因素。
3) pore size distribution
孔隙分布
1.
The effects of different relative molecular weight of partially hydrolyzed polyacrylamide (HPAM), pore size distributions of cores, different temperatures and salinity on the inaccessible pore volume (V_(IP)) of HPAM were studied by using double-slug method.
采用双段塞法分析了部分水解聚丙烯酰胺 (HPAM)的相对分子质量、岩心孔隙分布、温度及矿化度对聚合物的不可入孔隙体积 (VIP)的影响规律。
2.
Objective: To investigate the thermal expansion property and pore size distribution in the matrix of ZirconiaToughened Glass Infiltrated Nanometer-ceramic Composite(Al2O3/nZrO2).
目的:考察Al2O3/nZrO2纳米复合陶瓷基体的热膨胀性能及孔隙分布情况。
3.
The fractal dimension of pore size distribution is determined according to the slope of the correlative line between pore volume and pore diameter in logarithmic graphics.
本文建立了土体孔隙分布的分形模型,导出用分维和进气值表示的水分特征曲线和渗透系数的理论表达式。
4) pore distribution
孔隙分布
1.
Effect of pyrolysis conditions on the char surface area and pore distribution;
热解条件对煤焦比表面积及孔隙分布的影响
2.
Quantitative measurement of ceramic uranium dioxide porosity and pore distribution;
陶瓷UO_2孔隙率与孔隙分布的定量测量
3.
Relation of pore distribution of coal with water infusion increment in seams;
煤孔隙分布与煤层注水增量的关系
5) pore fluid
孔隙流体
1.
Computation of seismic properties of pore fluid.;
孔隙流体地震特性的计算
2.
An uniform mechanism of natural hazards in geotechnical engineering involving pore fluid is put forward.
涉及流体的岩土工程自然灾害统一机制的过程可以分为 4个阶段 :(1)在孔隙流体存在的条件下岩土材料分叉 ,应变局部化启动 ;(2 )应变局部化导致岩土材料剪胀或剪缩 ;(3)剪胀或剪缩引起孔隙流体的流向应变局部化区或流出应变局部化区的渗流运动 ;(4 )在流体作用下岩土结构失稳。
3.
Based on analysis of effects of temperature and pressure on seismic properties of pore fluid and porosity and velocity of sandstone.
在分析储层温压变化对孔隙流体地震特性、岩石孔隙度和速度等影响的基础上 ,以油藏注水地震监测为例说明了油藏地震监测中考虑温压变化的重要性 。
6) bivariate pore volume distribution
二元孔隙体积分布
补充资料：催化剂孔隙度(degree of catalyst pole)
分子式：
CAS号：
性质：又称催化剂孔隙度(degree of catalyst pole)。多孔性催化剂颗粒内微孔的总体积，单位是ml/g。其大小由催化剂制备条件决定。
CAS号：
性质：又称催化剂孔隙度(degree of catalyst pole)。多孔性催化剂颗粒内微孔的总体积，单位是ml/g。其大小由催化剂制备条件决定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条