1) composite three sectional screw
三段式组合螺杆
2) three-zone screw
三段式螺杆
3) 3-part-sectional
三段组合式
1.
First of all, this article researches the formation of the Variable-pitch screw’s spiral slot when the commonly used 3-part-sectional screw is transporting the colu.
本文首先研究了常用的三段组合式分件供送螺杆供送圆柱形物体时螺杆螺旋槽的形成过程,并建立了构成螺旋槽的接触线、交点螺旋线以及槽底螺旋线的数学模型。
4) Screw Assemble
螺杆组合
1.
The effect of carbon fiber length distribution in the composite on its mechanical properties by optimizing screw assemble is studied and the wear behaviors are tested on a MM200 wear machine.
通过优化螺杆组合,研究了CFRPA复合材料中碳纤维的长度分布对其力学性能的影响,用MM—200磨损试验机测试了CFRPA复合材料的磨损性能。
5) screw configuration
螺杆组合
1.
The normal screw combination components of co-rotating twin screw extruder are presented,and the screw configuration is optimized.
介绍啮合同向双螺杆挤出机的常用螺杆组合元件并对螺杆组合进行优化,研究了不同螺杆组合和加料工艺对改性(丙烯腈/丁二烯/苯乙烯)共聚物(ABS)力学性能的影响,并设计出适合于改性ABS加工的螺杆组合及加料工艺。
2.
The effect of screw configuration on the dispersed particle size and its distribution in polymer blends prepared by co-rotating twin-screw extruder using different configurations was studied.
采用啮合同向双螺杆挤出机不同的螺杆组合形式,研究了熔融塑化区中捏合段数量对双螺杆挤出聚合物共混物表层和内层分散相粒子粒径及其分布的影响。
3.
The influence of screw configuration of melting section on the morphology changes of model polymer blends HOPE/PS in a co-rotating twin screw extruder was experimentally investigated.
研究了双螺杆熔融段不同螺杆组合对模型聚合物共混体系HDPE/PS相态变化的影响。
6) screw assemblies
组合螺杆
1.
Three-dimensional isothermal flows of polymer melt in the screw assemblies of a modular intermeshing co-rotating twin-screw extruder ZSK60 were simulated using the polymer flow analysis package POLYFLOW.
采用聚合物流动分析软件POLYFLOW,数值模拟了聚合物熔体在组合式啮合同向双螺杆挤出机ZSK60的组合螺杆中的三维等温流动。
补充资料：UR-9双螺杆式空气压缩机
UR-9双螺杆式空气压缩机
I甲之一9双螺杆式空气压缩机翻戳
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条