说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 真有效点
1)  Proper Efficient Point
真有效点
1.
Researches the relation ship between several kinds of main proper efficient points,the relation are: strict efficient points are Henig proper efficient points;strong efficient points are Borwein proper efficient points;Strong efficient points are Henig proper efficient points;Strong ef-ficient points are Hartley proper efficient points.
对几种主要的真有效点间的关系进行研究。
2)  Henig proper efficient points
Henig真有效点
1.
We prove that strictly efficient points are indeed equivalent to Henig proper efficient points.
文章证明了严有效点等价于 Henig真有效点
3)  Positive Proper Efficient Point
正真有效点
4)  Henig proper efficient point(solution)
Henig真有效点(解)
5)  TRMS
真有效值
1.
The Design of a Digital TRMS Electrical Parameter Test Instrumentation Based on CS5460A;
基于CS5460A的真有效值电参数测试仪的设计
2.
Realization of measuring TRMS of any signal waveform;
任意信号波形真有效值检测的实现
3.
The WB TRMS Electricity Isolated Sensor and Its Application;
WB系列真有效值电量隔离传感器及其应用
6)  true rms value
真有效值
1.
The adjusting apparatus uses singlechip AT89C52 as its core and uses the high precision A/D convertor ICL7135, precise operational amplifier ICL7650 and true rms value convertor AD637 to improve the testing precision.
介绍了以单片机AT89C52为核心设计的高压测试仪校准仪,该校准仪使用了高精度的A/D转换器ICL7135、精密运算放大器ICL7650和真有效值变换芯片AD637,提高了测量精度,利用串行显示驱动HD7279A芯片简化了电路设计,达到了令人满意的设计结果。
2.
Results show that the new method is capable of realizing a high accuracy AC/DC conversion for measurement of true RMS value.
讨论了用对数反对数电路实现真有效值 AC/ DC转换的方法 ,导出了基本的转换关系 ,分析了影响转换准确度的主要因素 ,用超 β差分对管实现了准确度优于 0 。
补充资料:闭式单点、双点压力机
代码:00413
设备名称:闭式单点、双点压力机
型号规格:公称力≥800kN
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB10924-89、GB10933-89、JB5200-91
1、滑块下平面对工作台上平面的平行度(mm)
30%精度储备20%精度储备达到规定值大于规定值 
0.02+0.10/100×滑块下平面的被测长度
     
2、滑块行程对工作台上平面的垂直度
30%精度储备20%精度储备达到规定值大于规定值 
0.05+0.02/100×滑块行程长度
     
(二)结构性能
     
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50%
大于规定值10%大于规定值达到规定值达不到规定值 
2、液压超负荷保险装置、微调装置、吨位指示器
全部具有全部具有部分具有没有 
(三)噪声dB(A)
     
1、公称力≤400kN
≤85≤87≤88>88 
2、公称力>400kN
≤87≤88≤90>90 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条