1) heating ratio
加热时机
1.
Optimal heating ratio of batch pipelining of cold and hot crude oils;
冷热原油交替顺序输送中加热时机的经济比选
2) heating time
加热时间
1.
Analysis to the influences of heating time on the Bell-type furnace;
浅析罩式退火炉加热时间的影响因素
2.
The equipment is composed of extrusion,liquid pressure station,intermediate frequency heating system(another introduction),cooling system,electric cabinet,operation bed,kcn-4s/w add-subtract counter can be used as high precise timer to control the tube heating time of the GTR type intermediate frequency respond heating stove expends to the tubes.
设备由挤压主机、液压站、中频加热系统(另外介绍)、冷却系统、电气柜、操作台组成,其中KCN-4S/W加减计数器可以用作高精度的定时器来控制GTR型中频感应加热炉对管子的加热时间。
3.
Researches show that when the air is preheated to 900 ℃ and oxygen concentration is enriched to 54%,the heating time decreases by 38%,the product rate increases by 61%,thermal efficiency increases by 30.
研究表明:在预热900℃和含氧体积分数为54%条件下燃烧与传统燃烧相比,加热时间可缩短38%,生产率可提高61%,热效率可提高30。
3) short time heating
短时加热
1.
Effects of short time heating on microstructure,mechanical property and conductivity of 2A50 aluminum alloys in T6 state were studied by a simulation test.
通过模拟试验 ,研究了短时加热后T6状态的 2A5 0铝合金显微组织、力学性能和电导率的变化规律 ,分析得出抗拉强度与电导率之间的线性关系式 :σb=15 6 9 0 0 5 - 48 95 1×σ(适用于σ≥ 2 3 5MS/m) ;确定了抗拉强度合格时电导率的极限值为 :σ≤ 2 4 1MS/m。
5) die heating
机头加热
1.
The geometrical feature, Theological attribute, thermodynamic attribute of melt and die heating in the pipe extrusion were studied based on Finite Element Method in this article.
运用CAE技术,分析和总结了影响篮网式管材挤出机头内熔体流动的几何特征参数、材料流变性能、材料热物理因素及机头加热等问题,了解了篮网式管材成型机头的结构特点、流动特点和加工特点,为从事篮网式机头设计及工艺加工专业人员提供技术参考。
补充资料：时机纯熟
【时机纯熟】
（术语）时季与众生之机根将纯熟，得教法之化益，最为便利也。
（术语）时季与众生之机根将纯熟，得教法之化益，最为便利也。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条