1) bending destroyed durability
屈挠破坏性
1.
The effects of kinds and dosage of carbon black on bending destroyed durability and dynamic properties of NR and S-SBR vulcanizates were discussed.
探讨炭黑种类及用量对天然橡胶(NR)和溶聚丁苯橡胶(S-SBR)硫化胶的耐屈挠破坏性及动态力学性能的影响。
2) flexing fatigue resistance
耐屈挠疲劳破坏性能
1.
The network of fillers was reinforced,the mechanical properties as well as the flexing fatigue resistance were improved,the wearing resistance was improved by 15%-30%,and the rolling resistance was reduced.
结果表明,黏土的加入不会对胶料的硫化特性产生太大影响;少量黏土的加入增强了混炼胶的填料网络作用,改善了炭黑/NR硫化胶的物理机械性能,耐磨性能提高了15%~30%,降低了滚动阻力,提高了耐屈挠疲劳破坏性能,当黏土填充量为4份时,复合材料的综合性能最优。
3) Buckling failure
屈曲破坏
1.
The buckling failure of composite laminates with a surface notch is explored through experiments and analysis.
通过实验研究和理论分析探讨了含表面缺口复合材料层压板的屈曲破坏。
2.
However, if cold-formed members are used for load bearing short colunm, problems such as: capacity of bearable load and deformation; the fluence on the ultimate hearing capacity and buckling failure from various factors, like shape and size of the tube and stiffening rib; the applicability of relevant provisions of 《Technical Code of Cold-formed Welded Type Steel Structure》(GBJ18-8.
但如果用于中高层建筑受力构件，冷弯薄壁焊接型钢短柱，所能承受的荷载和变形能力究竟如何；钢管的形状、尺寸及柱内的加劲肋等许多因素对短柱的极限承载力、屈曲破坏等的影响；现行GBJ18－87《冷弯薄壁焊接型钢结构技术规范》中的有关条款是否适用，都是有必要加以探讨的。
3.
By considering the compressive failure and buckling failure in the rafting process,the mechanical models are established to calculate the rafting lengths of one dimensional rafting ice and twodimensional finger ice.
基于渤海海冰现场观测资料 ,分析了重叠冰的基本特征 ;综合考虑海冰重叠过程中的屈曲破坏和挤压破坏模式 ,建立了计算一维重叠冰和二维指状冰重叠长度的力学模型 ,并依此对不同冰厚条件下的海冰重叠长度进行了计算。
4) buckling failure
溃屈破坏
1.
Analysis of buckling failure of consequent rock slope;
顺倾向层状岩质边坡溃屈破坏分析
2.
Based on the geological background and mechanism, mechanical model of buckling failure for the consequent slope is given in this paper.
从地质力学角度分析了顺层边坡的形成机制,抽象出了顺层边坡溃屈破坏的力学模型。
5) flexuosity rapture
曲屈破坏
6) yield failure
屈服破坏
补充资料：耐屈挠性
分子式：
CAS号：
性质：表示材料或制品抵抗因受反复屈挠作用而引起的物性下降直至破坏的性能。在橡胶耐屈挠试验中，通常用试片经受反复屈挠的次数同表面龟裂的出现以及割口增长的速度来表示橡胶的耐屈挠性好坏，试验采用德墨西亚屈挠龟裂试验机进行。
CAS号：
性质：表示材料或制品抵抗因受反复屈挠作用而引起的物性下降直至破坏的性能。在橡胶耐屈挠试验中，通常用试片经受反复屈挠的次数同表面龟裂的出现以及割口增长的速度来表示橡胶的耐屈挠性好坏，试验采用德墨西亚屈挠龟裂试验机进行。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条