1) unsaturated acid esterification/polymerization

不饱和酸酯化/聚合
2) unsaturated polyphosphoester

不饱和聚磷酸酯
1.
In vitro degradation properties of unsaturated polyphosphoester containing unsaturated olefinic bonds in repeat units;
主链型不饱和聚磷酸酯交联体系体外降解性能
2.
The in vitro degradation of the crosslinked composites formed by unsaturated polyphosphoester(UPPE)、N-vinyl pyrrolidone(NVP) and β-tricalcium phosphate(β-TCP) was investigated and the surface morphology of dagradation sample was imaged by scanning electron microscopy(SEM).
研究了不饱和聚磷酸酯(UPPE)、N-乙烯基吡咯烷酮(NVP)与β-磷酸钙(β-TCP)交联复合体系的体外降解过程,并用扫描电镜观察了降解一定时间后试样表面的形貌结构。
3.
Unsaturated polyphosphoester(UPPE) containing unsaturated olefinic bonds in repeat units was synthesized by fumaric acid,1,2-propylene glycol and phosphorous oxytrichloride as the initiation materials.
不饱和聚磷酸酯(UPPE)主链结构中含有富马酸二(1,2-丙二醇)酯(BPGF)的三种异构体。
3) unsaturated polyester

不饱和聚酯
1.
Study on preparation and characterization of flame retardant unsaturated polyester/montmorillonite nanocomposite;
不饱和聚酯/蒙脱土阻燃纳米复合材料的制备及表征
2.
Tolulene diisocyanate modified unsaturated polyester with high elongation;

具有高伸长率的二异氰酸酯改性不饱和聚酯
3.
Studies on tunable F-P cavity based on doped unsaturated polyester;

基于掺杂型不饱和聚酯的可调谐F-P腔的研究
4) unsaturated polyester resin

不饱和聚酯
1.
Study on synthesis of new unsaturated polyester resin with MPA;

马来海松酸不饱和聚酯树脂研究
2.
Study of XDB-1 Type of Unsaturated Polyester Resin;

XDB-1型不饱和聚酯树脂的研制
3.
Mechanical properties of waste printed wiring board powder reinforced unsaturated polyester resin(UPE)composites;
废旧线路板粉料增强不饱和聚酯复合材料力学性能
5) UP
[英][ʌp] [美][ʌp]

不饱和聚酯
1.
Preparation and Characterization of UP/Sepiolite Nanocomposites;

不饱和聚酯/海泡石纳米复合材料的制备及表征
2.
Application of Wollastonite in UP;

硅灰石在不饱和聚酯树脂中的应用
3.
STUDY ON TOUGHENING OF UP WITH LIQUID RUBBERS;

活性端基液体橡胶增韧不饱和聚酯的研究
6) UPR

不饱和聚酯
1.
Research progresses of UV-curable UPR system;

光固化不饱和聚酯树脂研究进展
2.
The results showed that toughness of the UPR 298# could be increased greatly using XNBR, however,UPR 191DC could not be toughened much.
采用液体丁腈胶增韧剂(XNBR)来增韧两种类型不饱和聚酯树脂:脆性191DC、韧性298#,结果表明:XNBR对298#有显著增韧效果,而对191DC增韧效果不明显。
3.
The differences between PMMA based SSM and UPR based SSM were discussed.

对市场上不同质量的聚甲基丙烯酸甲酯类(PMMA)和不饱和聚酯类(UPR)这两种产品进行了性能比较,同时给出了不同质量产品,特别是伪劣产品的鉴别方法。
补充资料:(C8-18饱和、C18不饱和)脂肪酸异丁酯
CAS:85865-63-0
中文名称:椰子脂肪酸异丁酯
(C8-18饱和、C18不饱和)脂肪酸异丁酯
英文名称:Fatty acids, C8-18 and C18-unsatd., isobutyl esters
Isobutyl cocoate
中文名称:椰子脂肪酸异丁酯
(C8-18饱和、C18不饱和)脂肪酸异丁酯
英文名称:Fatty acids, C8-18 and C18-unsatd., isobutyl esters
Isobutyl cocoate
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条