1) wire-to-plate spacing
线板间距
1.
In the experimental research,the influences of pulsed voltage,pulsed frequency,wire-to-plate spacing,wire-to-wire spacing and rate of bubbli.
为了提高脉冲放电对罗丹明B染料废水的脱色率η,采用线-板式脉冲放电反应器实验研究了脉冲电压Up、脉冲频率f、线板间距d、线线间距s、曝气量Q等对η的影响。
2) packing plate distance
板间距
1.
The relationship between gas pressure drop and gas resistance coefficient versus operation condition and gas phase Reynolds number in three packing plate distance was theoretically analyzed and experimentally measured in the centrifugal field.
为了利用旋转力场中流体运动的对称性 ,使转子中的填料既能让气液充分接触又具有小的形体阻力 ,而且能利用液体的表面张力来加速液体表面的更新 ,同时使设备具有良好的动平衡性与安装、维修的方便性 ,作者采用新研制的同心环波纹碟片填料[9],实验研究了 3种板间距下的旋转床气体压降随操作条件的变化关系 。
3) tray spacing
板间距
1.
The results show that the WPA extracted fraction of 84% is obtained at the free area rate of tray of 53%,tray spacing of 7 cm, and vibrating frequency of 150 r/min.
结果表明:筛板开孔率53%,筛板间距7cm,振动频率150r/min时,萃取率可达84%;结合洗涤和反萃可以得到合格的工业级磷酸。
4) spacing of needle and plate
针板间距
5) plate spacing
板间距
1.
Numerical investigation of effects of plate spacing on flow and heat transfer in sinusoidal channels;
波纹通道板间距对通道内流动与换热影响的数值研究
6) spacing of orifice
孔板间距
补充资料：线板儿
1.亦作"线板儿"。 2.作针黹时缠线用的板。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条