说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 数字化反馈算法
1)  digital feedback algorithm
数字化反馈算法
2)  digital feedback
数字反馈
1.
MATLAB simulation for an experimental setup of digital feedback control;
加速器数字反馈控制的MATLAB仿真
2.
In the aspect of multiple high accuracy A/D converter, a new type twice sampling A/D converter with digital feedback is talent showing its.
在复合式高准确度A/D转换器方面,一种新型的、采用数字反馈的两次采样A/D转换器脱颖而出。
3.
This paper describes a circuit for Hall device, which is used in a digital feedback study system for accelerator control.
介绍加速器数字反馈研究仿真实验平台中的Hall电路,该电路不仅用于磁场反馈,其电流输入电路又被用作系统的噪声注入电路。
3)  feedback algorithm
反馈算法
1.
Application of a feedback algorithm based on ABEL-HDL language to PLD design;
一种基于ABEL-HDL语言的反馈算法在PLD设计中的应用
2.
In this paper,the effect of feedforward algorithm,feedback algorithm and hybrid algorithm are com-pared by simulation,and verified on the experiment setting with the loudspeaker and the fan as the noise source.
有源噪声控制广泛应用于低频噪声控制,针对不同噪声信号使用前馈算法、反馈算法和前馈/反馈混合算法(简称混合算法)进行仿真,并在以扬声器和风机为噪声源的实验系统上进行实验验证,结果表明混合算法在仿真和实际中具有更快的收敛性和更好的抗噪声效果。
4)  digital algorithms
数字化算法
1.
Among the digital algorithms presently available for on-line monitoring of the dielectric loss factor of power apparatus,most of them must meet strictly the synchronous sampling criterion,simultaneously with a precondition that the power frequency must be invariable in the sampling periods.
针对现有电气设备介质损耗因数数字化算法多须信号频率在若干采样周期内不变且须严格同步采样的状况,基于瞬时频率理论提出了一种瞬时介质损耗因数的定义与数字化算法,并给出了算法的理论基础。
2.
Among the digital algorithms presently available for on-line monitoring of the dielectric loss factor of power apparatus,there are unavoidable limitations that most of them must meet strictly the synchronous sampling criterion,simultaneously with a low calculating resolution.
在目前电气设备介质损耗因数的数字化算法中,普遍存在着必须严格满足同步采样条件、计算分辨率低等局限性。
3.
Most present digital algorithms for on-line monitoring of the dielectric loss factor in power equipment are limited by the assumption of the synchronous sampling criterion which reduces the calculational resolution.
为解决在电气设备介质损耗因数的计算中必须严格满足同步采样条件和计算分辨率低的问题,基于Hilbert变换和复三角函数运算,提出了一种提高介质损耗因数监测准确度的数字化算法,并给出了算法的理论基础。
5)  digital feed forward control scheme
数字前馈控制算法
1.
A digital feed forward control scheme for the gradient amplifier in magnetic resonance imaging system (MRI) is proposed in this paper to obtain pulse currents for gradient coils with fast ramp speed and low ripple level.
针对这一要求,提出了一种数字前馈控制算法。
6)  feedback mutation genetic algorithm
反馈式突变进化算法
1.
The universal formula optimized with feedback mutation genetic algorithm was used in evaluating some cases and compared with other methods,results showed that the formula which is simple,comparable,universal and practical is free from the restriction in kinds and numbers of pollutants and easy to calculate.
将反馈式突变进化算法用于公式中的参数优化,得出优化后适用于多项污染物的空气质量评价普适指数公式。
补充资料:反馈线性化
反馈线性化
feedback linearization

   对非线性系统施加状态反馈使所得到的闭环系统成为线性的,或若闭环系统仍为非线性,则仍可找到一局部坐标系(jU)或即定义在U上的非异状态变换zjx)使非线性系统在新坐标下具有线性控制系统的形式。如果变换j是全局的、亦即URn,则称为全局反馈线性化,否则只能称局部反馈线性化。因为对线性系统有成熟的分析和设计办法,反馈线性化已成为非线性控制系统研究的重要途径并已得到了实际应用。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条