1)  Sound absorption mortar
					
	
					
				
				
	
					
				吸音砂浆
			
					2)  wave-absorbing mortar
					
	
					
				
				
	
					
				吸波砂浆
				1.
					The preparation routes of ferrite wave-absorbing mortar and paint are explored.
					
					
						
						
					
						探讨了铁氧体吸波砂浆、吸波涂料的制备路线,研究分析了铁氧体吸波微粉的有效分散技术以及掺入量对砂浆、涂料吸波性能及其他常规性能的影响。
					
					3)  electro-magnetic absorbing mortar
					
	
					
				
				
	
					
				建筑吸波砂浆
			
					4)  cement mortar
					
	
					
				
				
	
					
				砂浆
				1.
					Influence of bagasse magnesium lignosulfonate with relative different molecular weight on performance of cement mortar;
						
						不同相对分子质量的蔗渣木质素磺酸镁对水泥砂浆性能的影响
					2.
					The effect of the content of silica fume on the structure and property of the cement mortar and property of the cement paste were investigated.
						
						探讨不同掺量的硅灰对水泥净浆与砂浆性能及砂浆结构的影响。
					3.
					Effects of FDN and Calcium lignosulfonate(LS) on the properties of high-volume fly ash cement mortar were studied.
						
						研究了萘系高效减水剂(FDN)和木质素磺酸钙(LS)对高掺量粉煤灰砂浆性能的影响,测定了减水剂在胶凝颗粒表面的吸附、对水泥颗粒表面zeta电位等方面的影响。
					
					5)  Sand pulp
					
	
					
				
				
	
					
				砂浆
				1.
					Study on fly ash as substitute material of concrete and sand pulp;
					
					
						
						
					
						混凝土及砂浆合理掺用粉煤灰研究
					
					6)  slurry
					[英]['slʌri]  [美]['slɝɪ]
					
	
					
				
				
	
					
				砂浆
				1.
					Analysis of applying effects man-made sand in slurry and concrete;
					
					
						
						
					
						人工砂在砂浆和混凝土中的应用效果分析
					2.
					In this article, the characteristics, application, construction proportion and physical and mechanical properties of the polymer slurry used in abroad were introduced, which can be referenced by engineers.
						
						本文介绍国外聚合物砂浆的性质和应用、施工配比及物理机械性能 ,供设计人员参
					3.
					the primary factors influencing wafer warp(such as saw wire tension,times of slurry using and saw rate)were analyzed,the regular of warp distribution and the reasons of engendering warp were introduced.
						
						通过对切割线张力、砂浆使用次数、切割速度等影响翘曲度的主要因素进行实验分析,阐述了产生的原因,并得出了翘曲度的分布规律。
					补充资料:吸音
		分子式:
CAS号:
性质:声波通过媒质或遇到物质表面时,声能降低的过程。吸音一般用吸声系数来表征,测试材料吸音的方法有混响室法和声阻抗管法。前者多用于工程上,后者多用于实验室测试研究。通过混响室测出的吸声系数a5,按下式计算: 式中,V为混响室体积,m3;S为试样面积,m2;C为空气中声速,m/s;T60-1,T60-2分别为空室和放入试样后混响室的混响时间,s。
		
		CAS号:
性质:声波通过媒质或遇到物质表面时,声能降低的过程。吸音一般用吸声系数来表征,测试材料吸音的方法有混响室法和声阻抗管法。前者多用于工程上,后者多用于实验室测试研究。通过混响室测出的吸声系数a5,按下式计算: 式中,V为混响室体积,m3;S为试样面积,m2;C为空气中声速,m/s;T60-1,T60-2分别为空室和放入试样后混响室的混响时间,s。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条