1) scraping type polyurea
刮涂型聚脲
1.
This article analyses leakage cause for ash collecting platform of high temperature chimney and introduces application of scraping type polyurea waterproofing coating and polyurethane road joint sealant in leakage treatment.
分析了电厂高温烟囱积灰平台处渗漏的原因,介绍了刮涂型聚脲防水涂料和聚氨酯道路嵌缝胶等材料在工程渗漏综合治理中的应用。
2) spraying polyurea
喷涂聚脲
1.
Status and use of spraying polyurea elastomer technology;
喷涂聚脲弹性体技术的现状和应用
2.
of the spraying polyurea elastomer technology were reviewed.
喷涂聚脲弹性体技术,以其优异的综合性能和先进的施工工艺,引起了国内外材料界和工程界的极大关注。
3) polyurea coating
聚脲涂层
1.
The mechanism of cathodic disbonding properties of polyurea coating is discussed and the prescription of the elastic body is selected firstly.
探讨了聚脲涂料在金属上的阴极剥离机理及聚脲弹性体配方的选择,分析了金属表面、聚脲/金属界面附着力、聚脲涂料配方对聚脲涂层的耐阴极剥离性能的影响。
2.
The polyurea coating was tested with Taber tribo-machine and the high-pressure water jet erosion tester for studying the wear behavior of polyure coating under conditions of dry friction and high-speed water jet contained sand.
为研究聚脲涂层在干摩擦条件下和高速含砂水流冲蚀条件下的性能变化情况,用Taber磨损试验机和高速含沙水射冲蚀磨损试验机测试了聚脲涂层的磨损性能,用扫描电子显微镜和白光共焦三维轮廓仪观测涂层的磨损表面形貌,用表面红外光谱和电子显微镜能谱元素分析了涂层表面试验前后的组分变化,分析了涂层在2种摩擦条件下的磨损情况。
3.
It shows that there are cracks on the surface of epoxy coated concrete after 50 freezing-thawing cycles,and there is a large area coating off after 250 freezing-thawing cycles,the relative dynamic elastic modulus was decreased by 60%;while the surface of polyurea coating was still intact after 300 freezing-thawing cycles,and the modulus was only decreased by 8%.
采用快冻法,研究聚脲涂层和环氧涂层对混凝土抗冻性的影响。
4) spray polyurea
喷涂聚脲
1.
Application of spray polyurea in stands of the Olympic Sports Center Stadium;
喷涂聚脲弹性体在奥体中心体育场看台的应用
2.
Technique and application of spray polyurea elastomer;
喷涂聚脲弹性体技术与应用
3.
Recent development of spray polyurea elastomer;
喷涂聚脲弹性体的研究进展
5) Spray Polyurea Coating
聚脲涂料
1.
Preparation and Study on Spray Polyurea Coatings for Anti-corrosion of Oil-pipeline;
管道防腐大修用聚脲涂料的研究与制备
6) exposed polyurea waterproofing coating
暴露型聚脲防水涂料
补充资料：刮涂
分子式：
CAS号：
性质：系采用刮刀进行手工涂装以制得厚涂膜的一种涂装方法。刮刀以金属或非金属制作。有钢质、玻璃钢、牛角片、木质、硬胶皮等刮刀。视其材质和形状的不同，可分别用于填孔、补平、塞缝、抹平等作业。供刮涂的涂料有各种厚浆涂料和腻子。狭义指刮刀涂布；广义也包括反辊式涂布。
CAS号：
性质：系采用刮刀进行手工涂装以制得厚涂膜的一种涂装方法。刮刀以金属或非金属制作。有钢质、玻璃钢、牛角片、木质、硬胶皮等刮刀。视其材质和形状的不同，可分别用于填孔、补平、塞缝、抹平等作业。供刮涂的涂料有各种厚浆涂料和腻子。狭义指刮刀涂布；广义也包括反辊式涂布。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条