1) Brazing cooling technics
钎焊降温工艺
2) brazing technology
钎焊工艺
1.
The brazing technology for capillary tube-sheet joints has been studied using a self-made flexible controlling equipment of vacuum electron beam brazing.
应用自制柔性化电子束钎焊系统对毛细管板接头的钎焊工艺进行了研究,探讨了钎焊工艺参数对钎料扩散深度以及钎脚高度的影响。
3) Brazing process
钎焊工艺
1.
A whole brazing process for 6063 aluminum alloy was studied.
最后对钎焊接头进行了微观组织、外观变形及尺寸的测试实验,结果表明,该钎焊工艺过程有效保证了铝合金门窗框的焊接质量,满足了使用要求。
4) Brazing Procedure Specification (BPS)
钎焊工艺说明书，钎焊工艺规程
5) soldering
[英]['sɔldə] [美]['sɑdɚ]
低温钎焊
1.
The low temperature bonding between 95%Al2O3 ceramics and 45 steel was realized through first electroless Ni-P plating on Al2O3ceramic blocks and then soldering them to steel blocks with a low melting point filler metal of 63Sn-34Pb-2Ag-1Bi alloy.
采用化学镀Ni-P膜法金属化Al2O3陶瓷,并用63Sn-34Pb-2Ag-1Bi钎料膏实现了95%Al2O3陶瓷与45钢之间的低温钎焊。
2.
Process of electroless copper plating on Al_2O_3 ceramics and its soldering at low temperature;
进行了镀铜后Al2O3陶瓷低温钎焊工艺试验,研究了不同化学镀工艺条件对接头组织及力学的影响。
6) brazing temperature
钎焊温度
1.
Electron beam brazing temperature field PID control system;
电子束钎焊温度场PID控制系统
2.
Effect of processing parameters including brazing temperature and holding time on the joint mechanical property was also discussed by optical microscope,SEM and EDS.
研究表明,钎焊温度为900℃,保温时间为5 min时,接头抗剪强度最高,达144 MPa。
3.
The effects of brazing temperature and time on the structure and property of the brazed joint between graphite and TZM alloys with Ti-based filler in vacuum were presented.
研究了钛合金真空钎焊石墨与TZM合金过程中,钎焊温度和时间对钎焊接头组织和性能的影响。
补充资料：采气工艺(见天然气开采工艺)
采气工艺(见天然气开采工艺)
gas production technology
，一‘J\匕乙吕天然气开采工艺pro以uetionteehnology)见
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条