1)  non-quenched/tempered steel
					 
	
					
				
				 
	
					
				非调制钢
				1.
					For precision forging crankshaft of tiny-automobile, non-quenched/tempered steel will replace other materials.
						
						对于精密锻造的微车曲轴,非调制钢将逐渐替代其它原材料。
					
					2)  non-hardening and tempering oil pipe
					 
	
					
				
				 
	
					
				非调制石油管钢
			
					3)  microalloyed steel
					 
	
					
				
				 
	
					
				非调质钢
				1.
					Prediction models of austenite dynamic recrystallization of medium-carbon microalloyed steel during forging process;
						
						非调质钢锻造过程奥氏体动态再结晶模型的建立
					2.
					In order to lower the flow stress in the cold heading process,the Bauschinger effect of microalloyed steel MFT8 for cold heading bolt was studied.
						
						为了降低冷作强化非调质钢冷镦变形的变形抗力,研究了冷作强化非调质钢MFT8在冷变形过程中的鲍辛格效应。
					3.
					A martensitic microalloyed steel was prepared by addition of low carbon and suitable alloying elements such as Mn, Si and Cr.
						
						通过少量C与适量合金元素Mn、Si、Cr配合,制备了低碳马氏体型非调质钢。
					
					4)  non-quenched-tempered steel
					 
	
					
				
				 
	
					
				非调质钢
				1.
					Study and applications of new microalloy non-quenched-tempered steel;
					 
					
						
						 
					
						新型微合金非调质钢的研究
					2.
					Advance in Microalloying Non-Quenched-Tempered Steels for Auto;
					 
					
						
						 
					
						汽车用微合金化非调质钢的进展
					
					5)  non-quenched and tempered steel
					 
	
					
				
				 
	
					
				非调质钢
				1.
					Effect of Ti-containing complex inclusions on the microstructure and mechanical properties of medium carbon non-quenched and tempered steel;
						
						含Ti复合夹杂物对中碳非调质钢组织和力学性能的影响
					2.
					Precipitation behavior of Ti-deoxidized products in non-quenched and tempered steel;
					 
					
						
						 
					
						非调质钢中钛脱氧产物析出行为
					3.
					Metallurgical behavior of titanium oxides in non-quenched and tempered steel;
					 
					
						
						 
					
						非调质钢中钛氧化物冶金行为
					
					6)  non quenched and tempered steel
					 
	
					
				
				 
	
					
				非调质钢
				1.
					Refining and forging experiments of non quenched and tempered steel containing sulphur were carried out in laboratory.
						
						在实验室对含硫非调质钢进行了冶炼和锻压实验,结果表明:随钢凝固速率的增加,钢中硫化物夹杂的尺寸减小而数量增多;随锻压压缩比的增加,硫化物夹杂碎裂而变得细小;在950℃锻压时硫化物的塑性最好,在1 250℃时硫化物的塑性较好,在1 050~1 150℃之间硫化物的塑性较差;随着加热时保温时间的延长,硫化物夹杂的数量减少而尺寸增大。
					2.
					The effect of rolling processes on microstructure and properties of non quenched and tempered steels for oil well tube with various composition was studied.
						
						结果表明 ,中碳铁素体—珠光体型非调质钢完全满足 N- 80油井管的要求 ,在 95 0~ 85 0℃大压下量终轧有利于获得较高的韧
					3.
					A kind of economical non quenched and tempered steel, which is suitable for making the 2VQS engine crankshaft in Shanghai Volkswagen was developed.
						
						开发了一种满足上海大众 2 VQS发动机曲轴用非调质钢。
					补充资料:非想非非想处天
		1.佛教语。即三界中无色界第四天。此天没有欲望与物质﹐仅有微妙的思想。
		
		说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条