1) Rotary joint
旋转连接部件
1.
The thesis is the technical improvement of existing Signal Transmission System of Rotary joint Component in Vehicle.
论文是对现有军事车辆旋转连接部件综合信号传输系统的技术改进。
2) rotary joint
旋转连接
1.
Optical rotary joint is a free space interconnection component.
旋转连接器是一种自由空间动态光互连器件。
3) rotating parts
旋转部件
1.
According to the characteristics of frequent fault and difficult diagnosis of rotating parts,selecting more interrelated vibration parameters as original character vectors,how to collect the characters from fault database and analyze rotating parts running conditions by applying fuzzy clustering way is demonstrated in this paper.
针对大型设备旋转部件故障模式复杂难以辨识的特点,选取与其运行状态密切相关的多个振动参数作为原始特征模式,阐述如何从故障信号数据库中,应用模糊聚类方法对旋转部件运行状态进行评判,挖掘出诊断的敏感特征参数。
2.
The echo signals of moving targets with rotating parts are analyzed in this paper;then according to their charac- teristics,a matching decomposition algorithm with a dictionary of two types of atoms,i.
分析了具有旋转部件的运动目标回波信号的特点,提出了以单频信号和正弦调频信号为原子的双信号集匹配分解法。
3.
Based on radar back scattering,unitary model of radar returns from aircraft rotating parts,such as the propellers of propeller-driven aircrafts and the rotors of helicopters are derived in detail,and the specifications of parameters in model are normalized.
基于雷达后向散射理论,详细推导并建立飞机旋转部件微多普勒特征的通用模型,对模型参数进行规范的定义和说明,运用相位调制分析了微多普勒特征产生的物理机理,并针对姿态角变化对微多普勒特征的影响进行仿真实验。
4) rotary joint
旋转连接器
1.
Design of novel dual-channel optical rotary joint by using de-rotating prism;
新型棱镜型双通道光纤旋转连接器的设计
2.
A new dual channel optical rotary joint has been proposed by infrared coupling technique to transmit optical signals across rotational interfaces to ensure continuously transmitting signal.
提出一种新型双通道旋转连接器。
3.
A novel multi-channel optical rotary joint using square-cylinder de-rotating prism was proposed based on analyzing the principle and conditions of de-rotating prism used in multi-channel optical rotary joint.
本文分析了棱镜型多通道光纤旋转连接器的解旋转机理及条件,提出了一种新型的方双柱面解旋转棱镜结构的双通道光纤旋转连接器。
5) back connections
背部连接件
6) fiber optic rotary joint
光纤旋转连接器
1.
Design of fiber optic rotary joint based on photonic crystal fiber;
一种基于光子晶体光纤的光纤旋转连接器设计
2.
Single channel fiber optic rotary joint has simple structure, small size and low optical losses, but the unidirectional transmission limits its wide applications.
单通道光纤旋转连接器具有结构简单、重量轻和耦合损耗小的优点,但传输信号单一,不能双向传输的缺点限制了它的广泛应用。
3.
Based on fiber optic rotary joint,proposed is a method of transmitting high-speed infrared image from the head of continuous rotating scanner.
提出了一种基于光纤旋转连接器,从连续旋转扫描的探测器头部向机下传输高速红外图像的方法,并讨论了其中的关键模块的设计原理及方法。
补充资料：将UG里的一个装配部件输出成单个部件文件
法一：
- 关闭（turn off）FileàOptions->Load Options下"Partial Loading "选项
- 打开装配部件
- 选择File->Export->Part
- 在"Part Specification"下选择"new"
- 选择"Specify Part"，指定输出部件文件名称及位置
- 将"Object Selection Scope"设定为"All Objects"
- 选择"Class Selection->Select All"高亮所有对象
- 按"OK"
该种方法特点：每一个部件的特征都会汇集在新部件的MNT里。可以方便编辑。
法二：
- 闭（turn off）File->Options->Load Options下"Partial Loading "选项
- 打开装配部件
- Application->Assembly
- Assemblies->Components->Create New，给出想要输出的部件文件名及路径。
- 如下图1，在ANT上双击新产生的部件文件，使其成为工作部件。
- Assemblies->WAVE Geometry Linker，将设置改为"Body"，选择所有组件的体。
- 将"Create Non-associative"开关设为"On"，见下图2
- 将产生的部件设成显示部件，仅保存刚产生的新部件，不保存旧的装配部件。
 图1 |  图2 |
该种方法特点：每一个部件在新部件的MNT里只会显示一个link的特征。没有相应特征可以编辑。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条