说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 冲量载荷
1)  impulse [英]['ɪmpʌls]  [美]['ɪmpʌls]
冲量载荷
1.
To form a cosine distribution impulse around cylindrical shell circumference by using mild detonating fuse;
用柔爆索构成沿圆柱壳体周向呈余弦分布的冲量载荷
2)  cosine density impulse
余弦冲量载荷
3)  impact loading
冲击载荷
1.
Simulation on dynamic response of crack subjected to impact loading;
冲击载荷作用下裂纹动态响应的数值模拟
2.
A numerical simulation on the deformation of heterogeneous metallic foams subjected to impact loading;
非均匀泡沫金属材料在冲击载荷下的变形模拟
3.
The variation of porewater pressure and its relationship with liquefaction and densification in saturated sand under impact loading;
冲击载荷下饱和砂土中孔隙水压力的变化及其与液化密实的关系
4)  Impact Load
冲击载荷
1.
Experimental Research on Xcxy-1 Sbsorber under Impact Load;
冲击载荷下Xcxy-1型减振器减振效果实验研究
2.
Experimental research on rubbing beam under impact load;
防撞梁受冲击载荷的试验研究
3.
Numerical simulation of steel fiber reinforced concrete under impact load;
冲击载荷作用下钢纤维增强混凝土的数值模拟
5)  repeated impact load
多冲载荷
1.
The layers that can resist the repeated impact load had been made using three methods of laser cladding, plasma surfacing and flame bead welding.
显微分析表明:激光熔覆层组织致密,晶粒细小,与基体结合牢固,对基体热影响小,稀释率最低;消除裂纹、孔隙、夹杂物等缺陷的覆层成品率最高;激光熔层在其屈服强度20%的多冲载荷下,表层组织混乱,晶粒出现扭曲变形;Co基合金覆层X射线衍射谱相位和峰值强度发生了较大变化;Ni基合金覆层衍射谱没有变化;Fe基合金覆层衍射谱有较小变化。
2.
There are many components which are working under the repeated impact load in project.
工程中广泛存在着多冲载荷下服役的零构件;在多冲这种动载应力波作用下的零部件大都在多冲的接触表面出现或引发各种缺陷并导致早期损伤失效。
6)  impulsive load
冲击载荷
1.
Experimental study on the impulsive load of follow fuel assembly of swimming pool research reactor;
池式研究堆跟随燃料组件冲击载荷实验研究
2.
The dynamic response of functionally graded plates was simulated under impulsive load.
利用数值模拟方法研究了在冲击载荷作用下组份成分对称分布的功能梯度板的动态响应。
3.
Based on the weighted residual method for the nonlinear dynamic equilibrium equation with finite deflection effect being taking into account, an energy conservation was established when the plate is subjectedd impulsive load.
通过加权残数法,给出了考虑有限变形时刚塑性板在冲击载荷下的能量守恒方程。
补充资料:冲量
冲量
impulse 
    力的时间累积效应的量度。是矢量。如果物体所受的力是大小和方向都不变的恒力F,冲量I就是F和作用时间t的乘积。如果F的大小、方向是变动的,冲量I应用矢量积分运算。冲量通常用来求短暂过程(如撞击)中物体间的作用力,即由物体的动量增量和作用的时间而估算其作用力。此力又称冲力。冲量的单位和动量相同,在国际单位制中为千克·米/秒。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条