说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 判定基准
1)  defining principle
判定基准
2)  judgement standard
判定标准
1.
On the present basis, the judgement line for little probability events is explicated, and then,the judgement standards are reckoned for different situations, finally, calculating formulaeof the judgement standards are given.
结合工程项目质量控制的特点,分析了现行管理图判定标准所存在的问题,指出控制图判定标准的理论依据中所指的小概率事件存在含糊不清和判定尺度不同等现象,给控制图的判定带来困难。
3)  criterion [英][kraɪ'tɪəriən]  [美][kraɪ'tɪrɪən]
判定标准
1.
[Objective ] To affirm the reliability of the criterion for judging paternity set by our laboratory.
[目的]进一步确认我室确定的亲子鉴定判定标准的可靠性。
4)  determinant rule
判定准则
1.
Based on the Maximum permissible error for"Zero-setting and tare devices"with the regulation in OIML R61,this paper discussed the determinant rule.
本文主要针对目前在 JJG564—2002《重力式自动装料衡器》执行过程中,对于置零准确度的判定准则中出现的多种有争议的判据,结合 OIML R61(1996版)与(2004版)的原文内容的理解分析与实例,提出了自己对 OIML R61置零准确度判定准则的看法。
5)  judgment standard
判定标准
1.
Further introduction is also made on judgment standards of unauthorized constructions in order to perfect related law and regulation to promote smooth running for law enforcement work.
就违章建筑的定义、类别,尤其是对处理违章建筑的法律适用,结合执法实践进行了分析讨论,并对危害公共利益的违章建筑判定标准进行了介绍,以推动法律法规的完善和执法工作的规范。
2.
Chinese Marxism Hermeneutics is the knowledge of studying and explaining Marxism scientifically;the explanation subject of the Chinese Marxism Hermeneutics is the organic unification of individual subject,community subject and social subject,which determines the triune judgment standard for Chinese Marxism Hermeneutics covering "individual subject,community subject and social subject".
中国马克思主义解释学是一门研究科学理解与解释马克思主义的学问;中国马克思主义解释学的解读主体是个体主体、群体主体和社会主体三者的有机统一;这就决定了"个体理解、群体认同与社会实践"共同构成了中国马克思主义解释学"三位一体"的判定标准。
6)  judging criterion
判定准则
1.
A judging criterion of dynamic failure is proposed based on the ideology of performance-based design.
基于性能的设计思想,文章提出了一种网壳结构震后是否发生动力失效的判定准则。
补充资料:使用基准显示对话框设置基准的显示

使用“基准显示”(Datum Display) 对话框,可以独立于基准图元的名称(标签)指定单个基准图元的显示状态。单击“视图”(View)>“显示设置”(Display Settings)>“基准显示”(Datum Display),打开“基准显示”(Datum Display) 对话框。


对话框中有下列基准显示选项:


基准平面 (Datum Planes) - 显示基准平面及其名称。也可使用配置文件选项 display_planes 来设置。


基准平面标签 (Datum Plane Tags) - 显示基准平面名称。也可使用配置选项 display_plane_tags 来设置。


基准轴 (Datum Axes) - 显示基准轴及其名称。也可使用配置文件选项 display_axes 来设置。
轴标签 (Axis Tags) - 显示基准轴名称。也可使用配置选项 display_axis_tags 来设置。


点符号 (Point Symbols) - 显示基准点及其名称。也可使用配置文件选项 display_points 来设置。


点标签 (Point Tags) - 显示基准点名称。也可使用配置文件选项 display_point_tags 来设置。


坐标系 (Coordinate Systems) - 显示坐标系及其名称。也可使用配置文件选项 display_coord_sys 来设置。


坐标系标签 (Coordinate System Tags) - 显示坐标系名称。也可使用配置选项 display_coord_sys_tags 来设置。


旋转中心 (Spin Center) - 显示旋转中心符号。也可使用配置文件选项 spin_center_display 来设置。


曲线标签 (Curve Tags) - 显示曲线名称。也可使用配置选项 curve_tag_display 来设置。


使用“全选”(Select All) 或“取消全选”(Unselect All) 按钮,可一次显示或隐藏全部基准图元。


在“点符号”(Point Symbol) 下,可以指定想要用于指定点的符号类型。选项有“十字”(Cross)、“点”(Dot)、“圆”(Circle)、“三角形”(Triangle) 和“正方形”(Square)。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条