1) galvanized sheet image
镀锌板图像
2) the coating of galvanized plate
镀锌板镀层
1.
Determination of trace cadmium in the coating of galvanized plate by hydride generation atomic fluorescence spectrometry
氢化物发生-原子荧光光谱法测定镀锌板镀层中痕量镉
4) galvanized steels
镀锌板
1.
The passivation technology of galvanized steels were reviewed in details,specially the development of research on organofunctional silanes films and their anti-corrosion performance.
综述了有机硅烷的结构、分类、钝化工艺和缺陷,以及有机硅烷在镀锌板上的研究进展和耐蚀性能。
5) galvanized steel
镀锌板
1.
The effect of shielding gas type on laser weldability of galvanized steel;
保护气体种类对镀锌板激光焊接性的影响
2.
88mm galvanized steel,T-joint type,0.
88mm厚的镀锌板进行了激光钎焊实验,采用T形接头形式,焊丝为0。
3.
The zinc distribution and corrosion resistance of the laser-welded joint of galvanized steel were investigated.
研究了镀锌板激光焊接接头锌的分布及焊接接头耐蚀性能。
6) galvanized sheet steel
镀锌钢板
1.
The commercial hot-dip galvanized sheet steel was investigated for its corrosion behavior in three different seawater zones in Qingdao with electrochemical measurement,weight loss test and SEM.
开展了热镀锌钢板在青岛不同海水区带的实海腐蚀测试,并利用电化学测试、失重腐蚀测试和扫描电镜研究了镀层的海水腐蚀行为。
2.
With the rapid development of Chinese economy, demands for galvanized sheet steels increased significantly because of the rapid development of construction and automotive industry during the last decade.
随着国内经济的持续稳定发展,在过去的10年中,由于建筑和汽车行业的快速发展,对镀锌钢板的需求持续旺盛。
3.
occured in forming and after coating of the prephosphating galvanized sheet steel,this paper demonstrates analyses on all kinds of influential factors happened in production and forming in detail,after that,provides some solutions on purpose.
为解决预磷化镀锌钢板加工成形、涂装后易出现的条影、针孔、粗糙等问题,对其生产及加工成形过程中的各种影响因素进行了详细分析,并有针对性地提出一般的解决办法。
补充资料：表面合金化镀锌钢板
表面合金化镀锌钢板
surface-alloyed galvanized steel sheet
裹面合金化镀锌钢板(surfaee一alloyedgalvanized steel sheet)由普通镀锌钢板经合金化处理而成的钢板。其镀层表面呈银白色，具有良好的耐蚀性、加工工艺性和涂装性，可焊性也比普通镀锌钢板好。其镀层结构主要受扩散、退火温度、时间、镀锌层厚‘望以及镀液中锌含量等因素的影响。不同的工艺条件，可使合金化层形成不同的相结构。合金化镀锌钢板的使用性能与镀层结构有密切关系。铁一锌合金化层中，铁的含量对合金化层的耐蚀性、涂装性及加工性有重要影响。从综合性能考虑，以镀层中含铁8%时为最佳。 合金化镀锌钢板可简化表面处理工序.省去酸洗、喷砂等工序，有较好的经济效益。在农业机械产品上的应用有:施肥机械、施肥播种机、中耕施肥机的肥料箱和种子箱:手扶拖拉机的带轮罩壳等薄板件;金属粮仓的仓体、仓盖等;种子加工机械的窝眼筒、筛板等;农用汽车的薄板件;谷物和茶叶烘干机的薄板件等。(王广扬)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条