1) Mathematical models of microwave-vacuum drying kinetics
干燥动力学数学模型
2) drying kinetic model
干燥动力学模型
1.
The drying kinetic models for both constant andfalling rate period have been proposed.
测定了浸渍催化剂在低床层喷动干燥器内不同床高下气达和压降的关系，建立了恒速及降速阶段的干燥动力学模型。
3) drying mathematical model
干燥数学模型
1.
The factors which influence the solar convective drying properties of candied date are discussed in theory based on experiment,the characteristic rules of heat transmission and mass transmission about candied date are analyzed when it is being dried with intermittent drying,and the corresponding drying mathematical model is set up.
以实验为基础从理论上分析了影响蜜枣太阳能对流干燥特性的因素，探讨了难干物料密枣在间歇干燥时传热传质特性的规律，并建立了相应的干燥数学模
4) drying dynamics
干燥动力学
1.
The drying dynamics models of baked drying and microwave drying were Page equation,and the drying dynamics model of vacuum drying was simplification diffuseness mode.
烘干和微波干燥动力学模型为Page方程;真空干燥为单项扩散模型。
2.
The principles,characters,drying dynamics and the important effect factors of vacuum-microwave drying technology are analyzed in this paper;the applications of the vacuum-microwave drying technology are introduced at the same time.
着重阐述了微波真空组合干燥技术的机理、特点、干燥动力学以及影响微波真空干燥的重要因素,并对微波真空组合干燥的应用研究进行了介绍。
5) drying kinetics
干燥动力学
1.
In accordance with the problems occurred in the existing production process and equipment of styrene butadiene styrene block copolymer (SBS),the drying kinetics for the SBS particle at the outlet of the drying extruder was studied by using weight subtraction method on the single layer cylinder fluidized bed drier.
针对SBS现有生产工艺和设备中存在的问题 ,在单层圆筒形流化床干燥试验装置上 ,采用减重法对SBS生产装置中膨胀干燥机出口处的SBS胶粒进行了干燥动力学的研究。
2.
Drying kinetics experiments of magnesium hydroxide nanorods were carried out, and the drying curves as well as drying rate curves were obtained under different drying medium temperatures of 333K-513K along with the wet material bed -layer thickness of 7mm and different wet material bed -layer thicknesses of 0.
采用热分析动力学技术对干燥动力学实验数据进行处理后,得到氢氧化镁纳米棒的干燥微分机理函数为f(1-MR)=2MR(-MR)1/2,干燥积分机理函数为g(1-MR)=(-lnMR)1/2,干燥方程为MR=exp[-(kt)2],干燥速率方程为-dMR/dt=2kMR(-lnMR)1/2,干燥速率常数为k=Aexp[-Ea/RT]=Aexp[-Ev(1+CLL)/RT];指前因子A=10。
3.
This paper designed minitype laboratory measuring system for drying kinetics, to measure drying kinetics curve and equilibrium data.
针对闭式循环、自动参数检测及数据采集等试验台必备功能,对小型实验室干燥动力学测试系统进行了工艺及装备设计,用于测量干燥动力学曲线和平衡数据。
6) kinetic mathematical model
动力学数学模型
1.
The catalytic mechanism was proposed and the kinetic mathematical model of the catalytic reaction for obtaining the thermodynamic and kinetic pa.
建立了催化反应的动力学数学模型,获得了催化反应相关的热力学和动力学参数。
补充资料：磁流体动力学中的数学问题
磁流体动力学中的数学问题
athematical problem in 1 I*
磁流体动力学中的数学问皿【..即咖一句面峨阵.如，兹.山曰四血目脚喇吻1血;M.rlt.T.o妞r周略目双皿...“.M眼MaT.，ec‘”e3即脚，.] 与研究导电流体和气体在磁场中的运动有关的问题.
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条