1) RE-Fe based alloy coating
RE-Fe基喷涂层
3) Fe-Cr-based coating
Fe-Cr基涂层
1.
A Fe-Cr-based coating was prepared by HVOF thermal spraying on surface of 1Cr18Ni9Ti stainless steel.
采用超音速火焰(HVOF)喷涂技术在1Cr18Ni9Ti不锈钢表面制备了Fe-Cr基涂层,用磁致伸缩汽蚀仪研究了喷涂层的汽蚀性,并与水利机械常用材料ZG06Cr13Ni5Mo马氏体不锈钢进行了对比。
4) Fe/RE multilayer
Fe/RE多层膜
1.
Magnetic properties and structure of Fe/RE multilayers(Fe single layer ≤2.
研究了Fe/RE多层膜 (Fe单层厚度 <2 0nm)沉积态退火过程中 (温度≥ 473K)的结构与磁性 ,分析了磁性变化的原因。
5) Fe-Al coating
Fe-Al涂层
1.
Al/Ni coating and Fe-Al coating using for the bonding coaling were obtained by plasma spraying.
用等离子喷涂技术制备了用作粘结底层的Al/Ni、Fe-Al涂层,研究对比了这两种涂层在锌液中的耐腐蚀性能。
2.
Results show that with the increasing of temperature,the corrosion rate of all Fe-Al coatings also increased,the corrosion resistance of the Fe-Al coating with addition of Cr3C2 is superior to those without or with addition of WC.
结果表明:随温度升高,4种Fe-Al涂层的腐蚀增重都增加,添加Cr3C2比添加WC或不添加任何增强的Fe-Al涂层有更高的耐腐蚀性。
6) Fe/Cr coating
Fe/Cr涂层
1.
In this study,research on microstructure,high-temperature oxidation resistance property and dynamics of Fe/Cr coating were carried out by use of light microscope technique,scanning electron microscopy(SEM)and X-ray diffractometry(XRD),etc.
使用光学显微镜、扫描电子显微镜(SEM)、X射线衍射仪(XRD)等分析仪器研究了Fe/Cr涂层的抗高温氧化性、高温氧化动力学及其微观结构,并与传统的NiCr合金涂层进行了对比。
补充资料：RE-Fe-C permanent magnet materials
分子式：
CAS号：
性质：在RE-Fe中加入碳或B+C形成的永磁体。其性能接近于钕铁硼，但其矫顽力较高。合金可以用铸造法生产。用该法生产的Dy15Fe77C8，Nd9Dy6Fe77B0.8C7.7的大块磁体矫顽力司达995kA/m(12.5kOe)，因而RE-Fe-C可能成为有实用意义的新型铁基稀土永磁材料。
CAS号：
性质：在RE-Fe中加入碳或B+C形成的永磁体。其性能接近于钕铁硼，但其矫顽力较高。合金可以用铸造法生产。用该法生产的Dy15Fe77C8，Nd9Dy6Fe77B0.8C7.7的大块磁体矫顽力司达995kA/m(12.5kOe)，因而RE-Fe-C可能成为有实用意义的新型铁基稀土永磁材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条