1) Room-TemperatureAnnealing
室温退火
2) isothermal annealing
等温退火
1.
Prediction on the characteristics of isothermal annealing by using isochronal annealing data;
利用等时退火法预估等温退火效应实验研究
2.
The main components and structural features of the isothermal annealing production line after innovation were expounded,and combustion control and its control systems of the production line were detailedly introduced.
阐述了改造后的等温退火生产线的组成及主要结构特点,并详细介绍了该生产线的燃烧系统及燃烧控制系统。
3.
The crystallization process and kinetics were investigated by isothermal annealing at different temperature, DSC and XRD.
利用单辊急冷法制备了Cu64Zr36非晶合金,使用盐浴等温退火并用DSC和XRD研究了其晶化过程、玻璃转变和晶化动力学。
3) annealing temperature
退火温度
1.
Effect of annealing temperature on the microstructure of rapidly-solidified TiNi-Cu alloy ribbons;
退火温度对Ti_(53.5)Ni_(22.8)Cu_(23.7)合金快速凝固条带组织的影响
2.
Influence of annealing temperature on structure and properties of Al-6Mg-Sc-Zr alloy;
退火温度对Al-6Mg-Sc-Zr合金组织与性能的影响
3.
Effects of annealing temperature on microstructures and properties of the 25Mn-3Si-3Al-TWIP steel;
退火温度对25Mn-3Si-3Al-TWIP钢组织和力学性能的影响
4) annealing
[英][ə'ni:liŋ] [美][ə'nilɪŋ]
高温退火
1.
Effect of reduction on high temperature annealing of cold-rolled Ni;
形变量对冷轧高纯镍高温退火行为的影响
2.
Effect of high temperature annealing on corrosion property of cathode aluminium foils;
高温退火对阴极铝箔腐蚀性能的影响
3.
A study was carried out on the matter transmission and phase transition in annealing process of GMM.
研究了稀土超磁致伸缩材料在高温退火过程中的传质和组织转变, 对退火后出现的蘑菇状生长物进行了分析。
5) high temperature annealing
高温退火
1.
Effect of high temperature annealing on microstructure and properties of Ti-50.84at%Ni alloy ring;
高温退火对Ti-50.84at%Ni合金紧箍环组织及性能的影响
2.
Highly uniform multiwall carbon nanotubes (MWCNTs) were synthesized using template confining growth technique in combination with high temperature annealing.
结合氧化铝模板制约生长技术和高温退火处理,得到了相当统一的多壁碳纳米管。
3.
The results show that the Rockwell hardness decreases remarkably and the gradient distribution of the hardness value in cross section maintains after high temperature annealing.
研究了合金高温退火处理后的组织和性能变化。
6) low temperature annealing
低温退火
1.
The optimized low temperature annealing parameters for Laves phase Cr2Nb synthesizing by solid phase thermal reaction can theoretically provide guidance for preparing both high strength and high tough Cr2Nb alloy o.
优化出的Cr2Nb固相热反应合成低温退火温度,可为通过MA+热压(或烧结)工艺路线制备具有微/纳米晶结构的高强高韧Cr2Nb合金或Cr2Nb基复合材料提供理论指导。
2.
The optimized low temperature annealing time for Laves phase Cr_2Nb synthesized by thermal solid phase reaction provide possibility for preparing both high strength and toughness Cr_2Nb alloy or Cr_2Nb-based composite with micro-/na.
研究了900℃退火时,退火时间对Cr-Nb机械合金化(MA)粉的Laves相Cr2Nb固相热反应合成的影响规律,获悉了15h MA粉在900℃低温退火时能使Cr2Nb固相热反应合成充分进行的最短时间。
3.
The method of modulating the gate dielectric growth,the intrinsic gettering technique and low temperature annealing technique were applied to eliminate harmful backgrounds.
对电荷耦合器件(CCD)交流成像中存在的背景发白、亮条、亮点、拖影和固定图像噪声等不良背景进行了分析,并提出了调整栅介质生长方法、本征吸杂、低温退火等消除不良背景的具体工艺方法,获得了高质量的CCD器件。
补充资料：软化退火(见低温退火)
软化退火(见低温退火)
soft-annealing
rU0nhUO tUihUO软化退火(soft一annealing)见低温退火。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条