说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 80mm厚预应力空心薄板
1)  prestressed-concrete thin-hollow slab with the thickness of 80 mm
80mm厚预应力空心薄板
2)  prestressed-concrete thin-hollow slab
预应力空心薄板
3)  pre-stressed thin-hollow slab
预应力混凝土空心薄板
1.
The study and analyse of the test to structural capability of the pre-stressed thin-hollow slabs with the width of 80mm;
80mm厚预应力混凝土空心薄板结构性能试验研究分析
4)  prestressed hollow plate
预应力空心板
1.
Construction technology of prestressed hollow plate in post-tension method;
后张法预应力空心板的施工工艺
2.
This paper introduces design characteristics of long-span cast-in-situ concrete prestressed hollow plate in shooting gym for Beijing Olympic Games and section types of hollow plate,illustrates a few structure measures.
介绍北京奥运射击馆工程中,大跨度现浇混凝土预应力空心板的结构设计特点,阐述空心板截面形式的确定,并且对一些构造措施进行说明。
5)  SP prestressed hollow slab
SP预应力空心板
1.
According to the bearing capacity calculation method of SP prestressed hollow slab under normal temperature the formula for ultimate bearing capacity calculation of SP hollow slab under high temperature is derived.
根据SP预应力空心板常温下承载力的计算方法,推导了SP空心板高温下及高温后极限承载力的计算公式,参考了预应力混凝土材料性能在高温下(后)的退化规律,将高温下(后)SP空心板的承载能力实测值与计算值进行了对比分析,两者比较吻合。
6)  prestressed hollow slab
预应力空心板
1.
Process and technology control of making the pre-tensioned prestressed hollow slab;
先张法预应力空心板制作的工序与工艺控制
2.
<Abstrcat>AS far as the actual situation of prestressed hollow slab of dwelling house is concerned,a comparison of the reinforcement plans is made.
针对某住宅楼有缺陷的预应力空心板的实际情况,对加固修复方案进行了比较,采用粘贴单层碳纤维布对预应力空心板进行加固,并进行了有关的分析计算。
3.
From the experiments, the shear behaviour of prestressed hollow slabs under concentrated load acting on the centre of width are investigated and the following conclusions are reached: (1) There are four main failure modes in the slabs, which are bursting failure, shear-bursting failure, bursting-flexure failure and Iongitudinal cracking transverse flexure failure.
通过4块单块板和4块拼缝板试验,研完了预应力空心板在中置集中荷载作用下的抗剪性能,研究结果表明:预应力空心板的破坏型志主要有4种:(1)冲陷破坏;(2)剪切冲陷破坏;(3)冲弯破坏;(4)纵裂——横弯破坏。
补充资料:范维克鲍80式4.5mm气手枪
范维克鲍80式4.5mm气手枪
范维克鲍80式4.5mm气手枪

产品名称:范维克鲍80式4.5mm气手枪

feinwerkbau model 80 4.5mm air pistol

研制单位:德国韦斯廷格-阿尔腾堡有限公司

westinger & altenburger gmbh & co. kg,de

现状:生产

用途:射击训练与比赛


概 述

范维克鲍80式4.5mm气手枪是由德国韦斯廷格-阿尔腾堡有限公司研制和生产的,主要供射击运动员训练和射击比赛用。

结构特点

范维克鲍80式气手枪以压缩空气作为发射枪弹的动力源。它功能齐全,既能满足比赛要求,又能满足赛前训练要求;瞄准基线低,瞄准具可作精确调整。

1. 枪

该枪主要由枪管、压气机构和握把等部分组成。枪管带有刚性连接保护件,枪口部装有准星座,枪管后部装有发射时能自动密封气体的闭气件。

压气机构包括气筒、活塞、后坐定位卡、弹簧、待发杆和扳机等。气筒内表面经过研磨处理,活塞带有钢制活塞环并经过淬火和研磨处理,扳机的位置可根据射手需要进行调整。

握把用胡桃木制成,雕有网格花纹。

2. 瞄准装置

该枪瞄准装置由准星和照门组成。准星为可更换的片状准星,其宽度有3mm、 3.2mm、3.5mm、3.8mm、4.1mm、4.4mm、4.7mm和5mm等规格。照门为缺口式,宽度调整范围为2~2.8mm或3~3.8mm。

3. 弹药

该枪发射4.5mm气枪弹。

性能数据

口径----4.5mm

瞄准装置----

准星----片状

照门----缺口式,可调

配用弹种----4.5mm气枪弹

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条