1) gold-nickel-chromium alloys
金镍铬合金
2) Ni-Cr alloy
镍铬合金
1.
Study on smoothness of gold-paste layer fused to Ni-Cr alloy;
镍铬合金表面金泥涂层光洁度的实验研究
2.
A study on the attrition resistance of the gold-paste layer fused to Ni-Cr alloy;
镍铬合金表面金泥涂层耐磨性的实验研究
3.
The Effect on Anti-acid Corrosion Resistance of Ni-Cr Alloy Coating Titanium;
表面涂层技术对镍铬合金耐蚀性能的影响
3) chromium-nickel alloy
铬镍合金
4) chromium nickel alloy
铬-镍合金
5) nickel-chromium alloy
镍铬合金
1.
The investigate about the best gilded technical parameter which answers to the clinical demand about nickel-chromium alloy.;
符合临床要求的烤瓷镍铬合金镀金技术最佳工艺参数的研究
2.
The coping of porcelain fused to metal crown is made usually from Nickel-chromium alloy, because of its excellent mechanical properties, good metal-ceramic bond strength and relatively low cost.
镍铬合金具有优良的机械性能、低廉的价格和较好的金瓷结合强度,在口腔修复领域得到广泛的应用,至今已有几十年的历史。
3.
[Background] Because of favorable mechanical properties and low cost, Nickel-chromium alloys are widely used in crowns and bridges to replace compromised teeth .
【研究背景】镍铬合金因其价格便宜，具有良好的机械性能等优点，目前仍广泛用于烤瓷冠、桥修复。
6) Ni-Cr alloys
镍铬合金
1.
Objective:The purpose of this study was to determine the electrochemical corrosion characteristics of Ni-Cr alloys,which was electroplated with non-cyanogen gold coating treatment in vitro.
目的:本研究探讨镍铬合金经过无氰镀金后电化学腐蚀行为的变化,为无氰镀金技术在口腔临床上的应用提供理论依据。
2.
Ni-Cr alloys are prepared by self-made multi-function and high gradient directional solidification and arc melting equipment.
在自制的多功能高梯度定向凝固及电弧熔炼设备上,控制6J20镍铬合金的凝固速度,制备出铸态力学性能试棒和金相试样,观察6J20镍铬合金材料的光学显微组织并测试其力学性能。
3.
Ni-Cr alloys, as the non-precious base-metal of porcelain-fused-to-metals, are and will be widely used in our country, especially in the inland, for their low cost.
由于价格低廉,贱金属烤瓷冠桥在国内尤其是内陆地区应用非常广泛,且将持续相当长一段时间,其中应用最多的贱金属底层为镍铬合金。
补充资料：金镍铬合金
分子式：
CAS号：
性质：金基含镍和铬的三元合金，比铂、钯基合金的接触电阻低而且稳定可靠，耐腐蚀性能好，有AuNiCr5-1、AuNiCr5-2、AuNiCr7.5-1.5和AuNi-Cr22-6等合金。用真空中频炉充氩熔炼、AuNiCr合金的铸锭可直接冷加工成线材和板材等。用作电位计绕组材料。Au-NiCr22-6用作钎料，抗氧化性比金镍钎料好。
CAS号：
性质：金基含镍和铬的三元合金，比铂、钯基合金的接触电阻低而且稳定可靠，耐腐蚀性能好，有AuNiCr5-1、AuNiCr5-2、AuNiCr7.5-1.5和AuNi-Cr22-6等合金。用真空中频炉充氩熔炼、AuNiCr合金的铸锭可直接冷加工成线材和板材等。用作电位计绕组材料。Au-NiCr22-6用作钎料，抗氧化性比金镍钎料好。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条