说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 轮胎胎面花纹
1)  tread pattern
轮胎胎面花纹
2)  tire tread pattern
轮胎花纹
1.
Development on the image design system of tire tread pattern based on reverse engineering technology by Matlab software
基于Matlab的轮胎花纹图像反求设计系统
2.
In this paper,applying theory and practical technology of the expert system in tire tread pattern design are made researches and explorations.
本文对专家系统技术在轮胎花纹设计中的应用理论和实用技术进行了探讨和研究,建立了面向对象的轮胎花纹参数化图元库和花纹设计、选型、载剪、组合专家系统的规则库,并利用面向对象的专家系统骨架研制了轮胎花纹设计专家系统。
3.
The effect of drainage of tire tread pattern is also taken into account.
在平均流量模型的基础上,采用数值分析的方法,考虑了轮胎花纹的排水作用,研究了不同的胎面花纹对轮胎附着性能的影响,并对不同花纹胎面单元的压力分布等进行了深入分析。
3)  tread pattern
轮胎花纹
1.
Optimization of tread pattern pitch arrangement for low noise tire based on genetic algorithm;
基于遗传算法的低噪声轮胎花纹节距排列的优化方法
2.
The Study on Structure Trouble Diagnosis and Optimization of Lower Noise Tread Pattern;
低噪声轮胎花纹结构故障诊断及其优化研究
3.
The Simulation and Optimization Design of Modern Low-noise Tread Patterns;
现代低噪轮胎花纹仿真优化设计
4)  tread patterns
轮胎花纹
5)  Tire pattern
轮胎花纹
1.
The pattern of the tire is the most important structure factor, but the design of the tire pattern is very difficult because of the complicated acting mechanism between the tire and the road.
针对目前轮胎花纹设计的难点,本文提出了以先进轮胎花纹结构为参考,基于反求工程进行轮胎花纹设计的技术思路,达到提高轮胎设计水平的目的。
6)  rib tire
花纹轮胎
补充资料:轮胎胎面花纹
分子式:
CAS号:

性质:又称胎面花纹。通过模压或刻制在外胎胎面上的凸凹部分,其作用主要是改善轮胎的行驶性能,同时也增进美观。主要类型有:(1)适宜在铺装路面上行驶的公路花纹,又称普通花纹;(2)适宜在无路面条件下行驶的越野花纹,又称路外胎面花纹,其花纹块面积占胎冠总面积的40%~60%;(3)胎面行驶面中部为公路花纹、两侧为越野花纹者,称之为混合花纹,又称通用花纹或万能花纹,其花纹接地面积占行驶面总面积的60%~70%;(4)有行驶方向要求的花纹称之为定向花纹,其花纹呈“人”字形或斜条形,适用于工程机械和农用拖拉机轮胎,它能提供良好的牵引性和自洁性,装用这种花纹的轮胎时,必须使“人”字形或斜条形顶点与行驶方向一致,并在胎侧上用箭头标明行驶方向,如反向使用泥土会填漏沟槽,并失去牵引性能;(5)适宜在泥泞和冰雪路面上行驶的雪泥花纹,又称冬季胎面花纹,这是一种采用带锐角边缘的块状花纹,这种花纹有良好的防滑性能,可保证轮胎在冰雪和泥泞路上安全行驶。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条