1) closed-loop controlled clocking

闭环时钟控制
2) Real Time Closed-Loop Control

实时闭环控制
1.
Real Time Closed-Loop Control System for the Shot End JorgenG.Hedenhag;

压射端实时闭环控制系统
3) Dual-Loop Instantaneous Control

双闭环瞬时控制
4) clock control

时钟控制
1.
This paper presents a clock control circuit in which an electronic clock is made by a MCU AT89C2051 16-bit timer and real-time control is achieved by the electronic clock\'s function of precise timing.
提出的时钟控制电路,是利用单片机AT89C2051的16位定时器做成电子时钟,并利用电子时钟的精确定时作用实现了实时控制。
6) close loop control

闭环控制
1.
Construction design and experimental study of close loop controlled booster frictional drive;
闭环控制增压式摩擦传动装置的结构设计和实验研究
2.
The development of carrier aircraft capsulting system is introduced in this paper,also with the systemtatic research on electromagnetic ejection system based on the basic principle of electromagnetic launch,the close loop control structure is designed for the system with the control effect increased through smart control.
介绍了航母舰载机弹射装置的发展过程,从电磁发射基本原理出发,对电磁弹射系统进行了系统研究,设计了系统主回路闭环控制结构,通过智能化控制策略提高了控制效果,为研制舰载机电磁弹射系统提供了理论基础和技术支持。
3.
When close loop control being carried through Air Fuel Ratio of gas engine, it also should be used in the gasoline vapors recovery system, which magnet valves work as intermittent operation, so as to determine the effect of carbon canister clearing airflow on Air Fuel Ratio, and control the quantity of airflow.
对汽油机的空燃比进行闭环控制时,汽油蒸汽回收系统也要使用闭环控制方法,汽油蒸汽回收系统中的电磁阀以间歇方式工作,以便确定碳罐清理气流对空燃比造成的影响,并据此控制碳罐清理时气流量的大小,使得发动机空燃比总是处于可调节的范围以内。
补充资料:闭环控制
发动机电喷系统的闭环控制是一个实时的氧传感器、计算机和燃油量控制装置三者之间闭合的三角关系。氧传感器“告诉”
计算机混合气的空燃比情况,计算机发出命令给燃油量控制装置,向理论值的方向 调整空燃比(14.7:1)。这一调整经常会超过一点理论值,氧传感器察觉出来,并报告计算机,计算机再发出命令
调回到14.7:1。因为每一个调整的循环都很快,所以空燃比不会偏离14.7:1,一旦运行,这种闭环调整就连续不断。采用闭环控制的电喷发动机,由于能使发动机始终在较理想的工况下运行(空燃比偏离理论值不会太多),从而能保证汽车不仅具有较好的动力性能,还能省油。
计算机混合气的空燃比情况,计算机发出命令给燃油量控制装置,向理论值的方向 调整空燃比(14.7:1)。这一调整经常会超过一点理论值,氧传感器察觉出来,并报告计算机,计算机再发出命令
调回到14.7:1。因为每一个调整的循环都很快,所以空燃比不会偏离14.7:1,一旦运行,这种闭环调整就连续不断。采用闭环控制的电喷发动机,由于能使发动机始终在较理想的工况下运行(空燃比偏离理论值不会太多),从而能保证汽车不仅具有较好的动力性能,还能省油。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条