说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 关死特性
1)  shut-off characteristic
关死特性
2)  Characteristic of dead zone
死区特性
3)  relation characteristic
关系特性
1.
Viscosity-temperature and viscosity-pressure relation characteristics of foam drilling fluid.;
泡沫钻井液粘度与温度压力关系特性研究
4)  correlation property
相关特性
1.
A new generating method is proposed in the case of n=2(mod 4) and gets two sets whose correlation property are the same as that of Kasami large set.
提出了当移位寄存器的级数n =2 (模 4 )时 ,一种新的序列构造方法 ,所得到的两个集合与Kasami大集合序列的相关特性一致 。
2.
The feasibility of spreading spectrum with length-limited Logistic-Map sequence is proved in this paper, through analyzing its correlation property compared with practical spreading code.
对有限长度Logistic-Map混沌序列的相关特性进行了分析,与实际应用扩频序列的相关特性进行了比较。
3.
We analyzed the correlation property of digital chaotic sequence by logistic maps and compared it with the simulative chaotic sequence.
针对混沌信号具有伪随机性、类噪声以及对初始条件的极端敏感性的特点 ,用定点算法有效地产生了数字混沌序列 ,着重分析了 L ogistic数字混沌序列的相关性能 ,得到了序列长度对相关性能的渐近关系式 ,并与模拟混沌序列的相关性能进行了比较 ,仿真结果表明用定点算法产生的数字混沌序列具有与模拟混沌序列一样的相关特性 ,数字量化并没有破坏混沌序列的特性。
5)  turn-off characteristic
关断特性
1.
But the circuit stray inductance has serious influence upon the turn-off characteristic of IGCTs.
电路杂散电感会严重地影响IGCT的关断特性,增大器件的电压应力和关断损耗,甚至导致器件损坏。
2.
The turn-off characteristics determining the maximum operating frequency of ultra-fast photoconductive semiconductor switches are influenced by many factors.
超快光电半导体开关的最大重复工作频率由关断特性决定,而影响关断特性的因素很多。
3.
Purpose of the work is to propose a new device structure which suppresses parasitic latch-up effectively and also improves a turn-off characteristic by cascading of lateral high voltage devices LDMOS and LIGBT together without any considerable sacrifices of forward characteristic.
改进的结构在不影响LIGBT的正向导通特性的前提下,不仅有效抑制了寄生拴锁效应,而且改进了LIGBT的关断特性。
6)  performance relation
特性关系
1.
The performance relation between the heating load and the cycle coefficient was derived.
建立了热源热容量有限时,综合考虑传热热阻、热源与环境的热漏以及循环内不可逆性时的实际四温位不可逆吸收式热变换器循环模型,导出了泵热率和泵热系数的一般特性关系;利用单效溴化锂吸收式热变换器机组的工程数值计算方法,与热力学模型预测结果进行了对比分析,佐证了所建立的热力学模型及导出的特性关系的正确性;并探讨了不同工况时的循环性能,以及通过减小循环内不可逆性、热源热漏和对换热器总传热面积进行优化分配后循环性能可能提高的幅度。
补充资料:生关死劫
1.生的关头,死的劫数。谓人的生死命运。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条