1) wall cooling
管壁冷却
2) cooling wall
冷却壁
1.
Failure analysis and prevention for the damaged cooling wall of No.4 BF at Guangsteel;
广钢4号高炉冷却壁破损原因及维护措施
2.
Leak detecting for soft water closed circulation system and solution on making water of cooling wall are also introduced.
分析高炉软水密闭系统本体检漏、冷却壁漏水处理方法。
3.
6 section cooling wall tube root of blast furnace bosh were analyzed from three aspect cooling water of the blast furnace,body of the cooling wall and operation of the blast furnace,and according measures were decided to reduce and eliminate the breakage.
从高炉冷却水、冷却壁本体、高炉操作等三个方面对高炉炉腹第五、六段冷却壁管根破损的原因进行分析,并制定相应的应对措施来消除或减少其对高炉的影响。
3) copper cooling stave
铜冷却壁
1.
Model for inner proffie control of furnace wall lined with copper cooling stave based on the inverse problems in heat transmission;
铜冷却壁炉墙内型管理传热学反问题模型
2.
Study on the hot characteristics of hot and cold sides of the copper cooling stave with circular channels;
圆孔型铜冷却壁冷面及热面热态特性研究
3.
Adopting copper cooling stave to prolong BF campaign;
采用铜冷却壁延长高炉炉体寿命
4) stave
[英][steɪv] [美][stev]
冷却壁
1.
The calculation models of the heat transfer coefficient between the blast furnace gas flow and the heat surface of stave are established based on the substitution method of boundary condition.
基于边界条件替代法建立了高炉冷却壁热表面与炉气间的传热系数计算模型。
2.
4 blast furnace was considerably deteriorated, with its shaft's stave seriously damaged, the temperature of the cooling water in the furnace hearth's stave abnormally increased, the furnace bottom's temperature reaching an alarming level, and the furnace shell cracked and deformed in a number of locations.
韶钢4#高炉第一代炉役后期,炉身冷却壁大量损坏,炉缸部分冷却壁水温差超高,炉底、炉基温度达到安全警戒线,炉壳多处开裂变形,依靠外部打水维持生产的情况下,通过采取强化管理、加强高炉操作、炉体修补等措施,保证了高炉按计划安全停炉并创下投产以来的最好生产指标。
5) copper stave
铜冷却壁
1.
The development and application of the inner profile management model in Angang's BF lined with the copper stave;
鞍钢铜冷却壁高炉操作炉型管理模型开发与应用
2.
Realizing the self-protect ability of a blast furnace cooling system with copper stave;
高炉铜冷却壁自保护能力的实现
6) cooling stave
冷却壁
1.
Manufacture technology and progress of cooling staves for blast furnace;
高炉冷却壁的制备技术及其进展
2.
Convective heat transfer boundary equivalent replacement and model simplification of cooling stave of blast furnace hearth;
高炉炉缸冷却壁对流换热边界的等效置换与导热模型化简
补充资料：壁处理开管柱
分子式：
CAS号：
性质：玻璃毛细管内壁表面光滑，表面能很高，许多固定液很难涂渍均匀。为了除去表面活性点，提高表面湿润性，增加表面积，涂渍前对柱内壁进行表面处理。表面处理的主要方法有表面粗糙化、表面去活和化学改性等。
CAS号：
性质：玻璃毛细管内壁表面光滑，表面能很高，许多固定液很难涂渍均匀。为了除去表面活性点，提高表面湿润性，增加表面积，涂渍前对柱内壁进行表面处理。表面处理的主要方法有表面粗糙化、表面去活和化学改性等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条