1) resin percentage
含树脂率
2) resin content
树脂含量
1.
The resin content,the volatile content and the pr e-curing degree of the silica/phenolic resin prepreg cloth were on-line determ ined by near infrared diffuse reflection spectrum.
采用近红外漫反射光谱技术对高硅氧/酚醛预浸布的树脂含量、挥发分含量和预固化度等质量指标进行了在线测定。
2.
A β-ray monitoring system was developed, and the investigation was carried out for continuous on-line monitoring of resin content in carbon fiber/phenolic resin prepreg cloth.
利用自行建立的β-射线监测系统对炭/酚醛预浸布的树脂含量进行了连续监测研究。
3.
The mathematical models between near-infrared spectral parameters and resin content, pre-curing degree and volatile content a re built up and the effects of the analysis accuracy were investigated using the chemometrics method.
通过对酚醛树脂基高硅氧预浸料的近红外光谱进行分析,采用化学计量学方法建立了预浸料树脂含量、挥发份含量和预固化度的定量分析模型,研究了光谱预处理方式及光谱区域的选择对定量分析精度的影响。
3) sulf-resin
含硫树脂
4) tantalum-contained resin
含钽树脂
1.
The formation mechanism of TaC by tantalum-contained resin precursor was investigated through the analysis of components and morphologies of tantalum-contained resin after different heat treatment by XRD and SEM together with the DSC-TG results of tantalum-contained solution.
本研究借助XRD、SEM对含钽树脂先驱体不同温度热处理后物质的成分与形貌进行分析,并结合钽液的DSC-TG曲线揭示了含钽树脂转变生成TaC过程的反应机理。
5) watercontaining resin
含水树脂
6) gold adsorption
含氮树脂
补充资料：含氟丙烯酸酯树脂
分子式：
CAS号：
性质：是指加入氟烯烃单体与丙烯酸(甲基丙烯酸)酯类单体一起共聚制成的丙烯酸酯树脂。由于含氟单体的引入，提高了树脂的耐热性、耐寒性、防腐蚀性和电绝缘性能。近年来发展较迅速，主要用于制备涂料，如耐热涂料、防腐蚀漆和电绝缘漆等。
CAS号：
性质：是指加入氟烯烃单体与丙烯酸(甲基丙烯酸)酯类单体一起共聚制成的丙烯酸酯树脂。由于含氟单体的引入，提高了树脂的耐热性、耐寒性、防腐蚀性和电绝缘性能。近年来发展较迅速，主要用于制备涂料，如耐热涂料、防腐蚀漆和电绝缘漆等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条