1) allyl resin

烯丙树脂
3) acrylate resin

丙烯酸树脂
1.
Study on Synthesis of Waterborne Acrylate Resin and Their Modification;

水性丙烯酸树脂的合成及其改性的研究
2.
Environment friendly acrylate resin was prepared and applied in antifouling coating.

探讨环境友好型防污涂料的基料丙烯酸树脂的合成及其在海洋防污涂料中的应用。
3.
The acrylate resin used for holographic coating for creating imaging directly on printed paper surface was prepared.
研究探讨了一种适用于全息图文模压复制涂料的丙烯酸树脂的合成工艺。
4) acrylic resin

丙烯酸树脂
1.
Technical analysis and solving of abnormal occurrences in the production of acrylic resin;
丙烯酸树脂生产异常现象的技术分析及处理
2.
Research on synthesis of water-soluble acrylic resin;

水性丙烯酸树脂的合成研究
3.
Study on the environment-protection electrical steel insulating coatings of semi-inorganic acrylic resin;
环保半无机丙烯酸树脂型电工钢绝缘涂料的研究
5) polypropylene resin

聚丙烯树脂
1.
Experiment and application of polypropylene resin for lead-acid battery container;

铅蓄电池塑壳用聚丙烯树脂的试验及应用
2.
The causes of polypropylene resin decomposion,which was occurred in the squeezing process by using CMP230X-12AW double helical rod squeezer,as well as the type of decomposion and the factors influencing the decomposion were first analyzed.
主要分析了聚丙烯树脂在CMP230X-12AW型同向啮合自清洁式双螺杆挤压造粒机挤出过程中出现降解的原因、降解的类型以及影响降解的主要因素,给出了减少树脂降解的具体措施,措施的实施取得了满意效果。
6) acrylic acid resin

丙烯酸树脂
1.
Application of phenolic resin on the improving flame retardancy of acrylic acid resin

酚醛在丙烯酸树脂防火改性中的应用
2.
The emulsion polymerization process of enteric acrylic acid resin was studied.

采用乳液聚合法制备肠溶型药物包衣用丙烯酸树脂,采用甲基丙烯酸与甲基丙烯酸甲酯作为共聚单体、过硫酸钾作为引发剂、十二烷基硫酸钠及OP-10复配作为乳化剂、苯乙烯的二聚体作为分子量调节剂、碳酸氢钠作为pH值调节剂,考察了乳化剂配比及用量、引发剂及分子量调节剂的用量、反应温度、加料方式、相比等因素的影响,最终确定了实验制备药物包衣用丙烯酸树脂的最佳条件。
3.
Introduced the synthetic technology and approach of water-soluble and emulsion acrylic acid resin, summarized the development and application of water-borne acrylic acid resin in water-based ink, and pointed out some views of its development.
介绍了水溶型丙烯酸树脂和乳液型丙烯酸树脂的合成工艺和方法,阐述了水性丙烯酸树脂的研究进展及其在水性油墨中的应用情况,指出了油墨用水性丙烯酸树脂的发展趋势。
补充资料:苯二甲酸二烯丙酯交联不饱和聚酯树脂
分子式:
CAS号:
性质:以苯二甲酸二烯丙酯为交联剂形成的交联型不饱和聚酯。具有良好的耐热性、尺寸稳定性、耐水、耐候性。以邻苯二甲酸二烯丙酯为交联剂,通用型不饱和聚酯树脂为基料制得的玻璃钢制品,弯曲强度330.26MPa,体积电阻率1.9×1015Ω·cm。以苯乙烯为交联剂的弯曲强度280MPa,体积电阻率1.48×1014Ω·cm。先制成黏稠状的液体树脂,再加入10%~50%苯二甲酸二烯丙酯混溶后加工制得所需产品。可用作机械、电器用结构件和绝缘零部件。
CAS号:
性质:以苯二甲酸二烯丙酯为交联剂形成的交联型不饱和聚酯。具有良好的耐热性、尺寸稳定性、耐水、耐候性。以邻苯二甲酸二烯丙酯为交联剂,通用型不饱和聚酯树脂为基料制得的玻璃钢制品,弯曲强度330.26MPa,体积电阻率1.9×1015Ω·cm。以苯乙烯为交联剂的弯曲强度280MPa,体积电阻率1.48×1014Ω·cm。先制成黏稠状的液体树脂,再加入10%~50%苯二甲酸二烯丙酯混溶后加工制得所需产品。可用作机械、电器用结构件和绝缘零部件。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条