1) stress-induced crystallization
应力诱发结晶
2) strain-induced recrystallization
应变诱发再结晶
3) stress-induced crystallization
应力诱导结晶
1.
A computer modeling of PET HOY structure formation was developed based upon a combination of fundamental spinning kinetic equations, stress-induced crystallization, Euler's equation and Newton's dichotomy.
在基本纺丝动力学方程的基础上,引入显著的应力诱导结晶作用,运用改进的Euler方法和牛顿二分法,通过计算机求解动力学方程组,模拟涤纶HOY结构的形成过程,获得了纤维结构形成与卷绕速度、质量流量和侧吹风温度的关系。
4) stress induced
应力诱发
1.
The morphology of stress induced ε M in Fe17Mn5Si10Cr5Ni alloy was investigated by Transmission Electron Microscope (TEM) and High Resolution Electron Microscope (HREM).
用透射电镜和高分辨率电镜研究了Fe17Mn5Si10Cr5Ni合金的应力诱发εM形态。
2.
Under a tensile force, the stress induced martensite initially nucleated from the crack tip.
裂纹尖端的应变区未能诱发马氏体形核，而且妨碍了热诱发马氏体的长大在外加拉应力作用下，应力诱发马氏作从裂纹尖端形核后，先形成蝶状马氏体；随后系统中上部也发生了马氏体形核；不同取向的马氏体在长大过程中逐渐转化和合并分析了应变的变化特点，探讨了相变的微观机
5) Crystal stress
结晶应力
6) stress induced εM
应力诱发εM
1.
It was shown that the shape recovery strain decreases rapidly with increasing pre-strain when the deformation is above 5%,although the amount of stress induced εM still increases with increasing pre-strain in the range of 5%.
利用透射电子显微镜对不同变形量试样中应力诱发εM形貌进行观察得知,预应变量由小及大,诱发出的εM形态变化很大,从而对记忆效应产生不同的影响。
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条