1)  conductivity meter
					
	
					
				
				
	
					
				导电表
			
					2)  surface conductance
					
	
					
				
				
	
					
				表面电导
				1.
					Taking the polluted glass sheet as experimental subject, we have measured its surface conductance in fog chamber and obtained a large number of experimental data.
						
						加强对绝缘表面在此种情况下电导特性的基础研究 ,有助于进一步探究表面电导与污秽闪络的关系 ,有利于进行较为准确的绝缘在线监测工作。
					2.
					The hvmidity has an effcft on the insulator surface conductance and air conductance.
					
					
						
						
					
						湿度对绝缘体表面电导和气体电导有一定的影响,但通常在湿度传感器的研究中忽略了气体电导的贡献。
					
					3)  conductivity meter
					
	
					
				
				
	
					
				电导率表
			
					4)  surface conductivity
					
	
					
				
				
	
					
				表面电导率
				1.
					On the basis of a thin double layer theory proposed by Shilov et al, the broadband dielectric spectroscopy of suspensions of non-conducting spherical particles including surface conductivity of the stagnant layer, the mechanisms of the two typical dielectric dispersions (high and low-frequency dielectric dispersion) was elucidated in an electrokinetic way.
						
						以Shilov等提出的带有紧密层表面电导率的非导电球型粒子悬浮液宽频介电弛豫的薄双电层理论为基础,从电动力学角度解释了粒子分散系两种典型介电弛豫(高频和低频弛豫)的机制。
					2.
					By doping iodine,the surface conductivity of pure PES film changed 1 order of magnitude,but there is few effect on increasing surface conductivity of ion implanted PES film.
						
						用 15keV的N+ 和Ar+ 注入PES膜 ,纯PES膜表面电导率提高了 5个数量级 ,掺碘PES膜表面电导率提高 4个数量级。
					3.
					With this model the influence of the electrode configuration,interpolar distance,surface conductivity and the polarity of the applied voltage on the flashover voltage along the surface is investigated.
						
						通过模拟支柱绝缘子和穿墙套管的沿面放电模型,对电极结构、极间距离、表面电导率以及所加电压的极性等对沿面闪络电压的影响进行了试验研究,并分析了不同模型闪络特性差别的原因。
					
					5)  membrane surface conductance
					
	
					
				
				
	
					
				膜表面电导
			
					6)  surface semi-conductive layer
					
	
					
				
				
	
					
				表面电导层
	补充资料:导电表面膜形成法
		分子式:
CAS号:
性质: 属于复合导电材料制备方法中层状复合法之一,其制备方法是在普通绝缘性高分子材料表面用真空镀膜、静电沉积或者喷涂方法形成导电性薄膜,构成表面导电层。在作为导体使用过程中,电流只在表面层中流动,内部材料起机械支撑作用。其特点是需要的导电性填料少,导电性能好,尤其适合高频导电场合,通常作为抗静电材料、导电玻璃电极和仪器仪表等设备的外部装饰。
		
		CAS号:
性质: 属于复合导电材料制备方法中层状复合法之一,其制备方法是在普通绝缘性高分子材料表面用真空镀膜、静电沉积或者喷涂方法形成导电性薄膜,构成表面导电层。在作为导体使用过程中,电流只在表面层中流动,内部材料起机械支撑作用。其特点是需要的导电性填料少,导电性能好,尤其适合高频导电场合,通常作为抗静电材料、导电玻璃电极和仪器仪表等设备的外部装饰。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条