3) solid loading
固相含量
1.
Gelcasting was applied to shaping of titanium alloy(Ti6Al4V) powders and the preparation of titanium alloy powder’s slurries with high solid loading was investigated.
将凝胶注模工艺应用于金属Ti6Al4V合金粉末的成形,研究了高固相含量的Ti6Al4V合金粉末的料浆的制备,比较了金属浆料与陶瓷浆料的不同。
2.
Thedependence of AT suspension rheological properties on various solid loading and different dispersants wasstudied,and the influence of monomer(AM) and cross-linking agent(MBAM) content on properties of ATbodies was also discussed.
研究了分散剂和固相含量对钛酸铝浆料流变性的影响,并探讨了单体和交联剂用量对钛酸铝坯体性能的影响规律。
3.
The preparation of titanium alloy powder's slurries with high solid loading was investigated.
将凝胶注模工艺应用于金属Ti及Ti-6Al-4V合金粉末的坯体成形,研究了高固相含量的Ti粉和Ti-6Al-4V合金粉末的料浆的制备。
4) solids loading
固相含量
1.
The influences of solids loading on the rheological properties used for aqueous gel-casting were studied, and also in this paper the microstructures, densities, and strengths of yttria-stabilized zirconia were investigated.
主要研究料浆固相含量对氧化钇稳定氧化锆料浆流变性质,以及YSZ的微结构、密度和强度的影响规律,并分析讨论其原因。
5) solid content
固相含量
1.
Experimental study on the effect of solid content and density of high density drilling fluid on its rheological properties;
固相含量和密度对高密度钻井液流变性影响的实验研究
2.
Strontium ferrite is an important permanent magnetic material,but making the strontium ferrite slurry with high solid content and low viscosity is very difficult.
锶铁氧体是重要的永磁材料,但锶铁氧体粉体很难制备高固相含量、低粘度的浆料。
6) high solid loading
高固相含量
1.
In this paper, optimization conditions of preparation of high solid loading ceramics slurries are in vestigated by ways of powder sulface modification and uses of dispersant, some better technique ways of powder surface modification being intruduced,uses of dispersant being disscussed, and problem at present time are pointed.
通过从粉体表面改性和分散剂的使用两方面对高固相含量料浆的制备工艺进行了研究，介绍了一些陶瓷粉体表面改性方法，讨论了分散剂的作用，并指出了存在的问题。
补充资料：低分子量氨基甲酸酯多异氰酸酯
分子式：
CAS号：
性质： 是由二异氰酸酯与低分子量二元醇或三元醇按异氰酸酯基:羟基(NCO:OH)≥2:1的比例加成制得带有游离异氰酸酯基的低分子量多异氰酸酯。常用的有甲苯二异氰酸酯(TDI)与三羟甲基丙烷的加成物和六亚甲基二异氰酸酯(HDI)或异佛尔酮二异氰酸酯(IPDI)与三羟甲基丙烷的加成物。该类异氰酸酯蒸气压低，光稳定性好，主要用于聚氨酯涂料或胶黏剂的固化剂。
CAS号：
性质： 是由二异氰酸酯与低分子量二元醇或三元醇按异氰酸酯基:羟基(NCO:OH)≥2:1的比例加成制得带有游离异氰酸酯基的低分子量多异氰酸酯。常用的有甲苯二异氰酸酯(TDI)与三羟甲基丙烷的加成物和六亚甲基二异氰酸酯(HDI)或异佛尔酮二异氰酸酯(IPDI)与三羟甲基丙烷的加成物。该类异氰酸酯蒸气压低，光稳定性好，主要用于聚氨酯涂料或胶黏剂的固化剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条