1) tertiary recycling
三次再生
2) many a time and oft
屡次, 再三
3) primary recycling
一次再生
4) secondary recycling
二次再生
5) regeneration times
再生次数
1.
Thermal regeneration were used to investigate desorption performance of Tenax TA and the influence factors such as temperature and regeneration times were analyzed.
以甲苯为研究对象,通过动态吸附实验研究Tenax TA的吸附性能,考察进口浓度、流量和湿度对吸附性能的影响;通过热再生法研究Tenax TA的脱附性能,考察温度和再生次数对脱附性能的影响。
6) tertiary recrystallization
三次再结晶
1.
Effect of the cross shear rolling technological parameters on tertiary recrystallization of ultra - thin silicon steel strips;
异步轧制对硅钢极薄带三次再结晶的影响
2.
1mm in gauge by conventional rolling(CR) and cross shear rolling (CSR) separately, then the finished strips were annealed in furnace in different atmospheres for tertiary recrystallization.
采用常规和异步轧制分别将0 3mm厚的成品取向硅钢板冷轧到0 10mm以下,然后在不同气氛的热处理炉中进行三次再结晶高温退火,研究同步、异步轧制条件下,热处理工艺参数(退火温度、保温时间、退火气氛、升温速度)对取向硅钢极薄带的磁性能和三次再结晶行为的影响·结果表明,相同的工艺参数下,真空退火的硅钢极薄带的磁性能优于氢气处理的;退火温度越高,保温时间越长,升温速度越快,磁性能越好,三次再结晶发展得越完善
3.
The results indicate that ｛111｝ 〈112〉 and ｛110｝〈001〉texture which are favorable for tertiary recrystallization are increased and disadvan tageous ｛100｝〈011.
在真空或氢气保护下进行高温退火 ,研究不同工艺制度对三次再结晶薄带磁性能的影响规律。
补充资料：屡次
1.一次又一次。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条