1) pigging up
生铁增碳
2) high carbon iron
高碳生铁
3) low-carbon pig iron
低碳生铁
4) decarbonization of granulated pig iron
生铁粒化脱碳
5) carbon pick-up
增碳
1.
A Study on Carbon Pick-up in Ultra Low Carbon Molten Steel in Mold during Continuous Casting;
连铸时超低碳钢结晶器内钢液增碳的研究
2.
Analysis on carbon pick-up of liquid steel in CSP processing route in Magang;
马钢CSP流程钢水增碳现象的分析
3.
Progress in research on the influence of MgOC, Al2O3-C and ZrO2-C refractory upon carbon pick-up of molten steel is summarized.
叙述了MgO-C、Al2O3-C和ZrO2-C材料对熔钢增碳方面的研究进展;描述了MgO-C、Al2O3-C材料的增碳机理;指出了今后含碳耐火材料对熔钢增碳影响方面的研究重点。
6) recarburization
增碳
1.
During recarburization of the semi-steel,the bath temperature be effectively controlled by plasma heating,carbon content of semi-steel could be increased from 1.
在150 kW 等离子体感应炉内,进行了加热半钢升温、增碳和脱硫的实验。
2.
Major factors affecting liquid steel decarburization and recarburization in the process of RH vacuum treatment and continuous casting of extra low carbon steel were analytically studied based on datum obtained from the previous experiments and measures to be taken for promoting liquid steel decarburization and preventing it from recarburization recommended as well.
根据试验数据分析并研究了超低碳钢在RH真空处理和连铸过程中,影响钢水脱碳与增碳的主要工艺因素。
3.
Results show that one of the reasons causing transverse crack is recarburization in wire rod surface.
采用扫描电镜、大型金相显微镜对拉拔横裂纹试样进行观察并分析,结果表明:造成横裂纹的原因之一是盘条表面增碳。
补充资料：骨粒浸酸脱矿池
分子式：
CAS号：
性质：骨粒浸酸脱矿设备。系用花岗岩石料砌成或用普通建筑材料砌成并衬以塑料板或抗蚀层的方形或圆形池。也可采用涂覆耐酸防腐蚀材料的钢板制成的桶。一般深2～5m，容积10～26m3。池底放酸管口上应装带直径为6～10mm小孔的塑料假底以防放酸时骨素漏出；浸酸脱矿时通常将几个池或桶组成一组，采用逆流串酸。串酸用耐腐蚀泵输送或用压缩空气升液法进行。
CAS号：
性质：骨粒浸酸脱矿设备。系用花岗岩石料砌成或用普通建筑材料砌成并衬以塑料板或抗蚀层的方形或圆形池。也可采用涂覆耐酸防腐蚀材料的钢板制成的桶。一般深2～5m，容积10～26m3。池底放酸管口上应装带直径为6～10mm小孔的塑料假底以防放酸时骨素漏出；浸酸脱矿时通常将几个池或桶组成一组，采用逆流串酸。串酸用耐腐蚀泵输送或用压缩空气升液法进行。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条