1) tensile break
拉伸断裂，拉伸破裂
2) tensile fracture
拉伸断裂
1.
Effects of interfacial IMC on tensile fracture behavior of Sn-3.0Ag-0.5Cu solder joints on copper substrates;
界面金属间化合物对铜基Sn-3.0Ag-0.5Cu焊点拉伸断裂性能的影响
2.
Thermographic detection method of tensile fracture process for cracked metal specimens;
含裂纹金属拉伸断裂过程的热像检测方法
3.
Characteristics analysis of acoustic emission signals from steel specimens under tensile fracture and fatigue crack condition
钢制试件拉伸断裂及疲劳开裂声发射特征分析
3) tensile elongation at break
拉伸断裂伸长率
1.
The different results of tensile elongation at break,tensile strain at break,and nominal tensile strain showed that nominal tensile strain was more precise and truer compared with tensile elongation at break.
建议使用塑料拉伸性能试验方法的科研人员,进行相关材料的拉伸断裂伸长率和断裂标称应变的比对实验,以保证科研工作的延续性。
4) tensile fracture stress
拉伸破裂应力
5) Brazilian tension
劈裂拉伸
1.
By Brazilian tension tests of complete procedure for Three Gorges granite conducted by a servo-controlled testing machine,it is found that there exists obvious linear relationship between load and displacement of load point before breakage.
采用三峡花岗岩在伺服试验机上进行了劈裂拉伸全过程试验,发现试样破坏前加载力与加载点位移存在着明显的线性关系。
2.
In order to get the energy dissipation characters of Three Gorges granite under different loading modes,the complete procedure experiments of 3-point binding,Brazilian tension,uniaxial compression and triaxial compression are conducted with servo-controlled testing machines MTS and RMT.
采用RMT,MTS刚性伺服试验机,研究了三峡工程中隔墩花岗岩在三点弯曲断裂、劈裂拉伸、三轴压缩及单轴抗压等4种加载方式下的能耗特征。
6) Wood tensile fracture
木材拉伸断裂
补充资料：拉伸断裂强度
分子式：
CAS号：
性质：在拉伸试验中，试样在断裂点时所能承受的最大抗张应力。面积以试样在断裂处的原面积为准计算，而不能以断裂后已经减少了的面积计算。试验结果以kJ/m2表示。
CAS号：
性质：在拉伸试验中，试样在断裂点时所能承受的最大抗张应力。面积以试样在断裂处的原面积为准计算，而不能以断裂后已经减少了的面积计算。试验结果以kJ/m2表示。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条