2) punched hole construction
冲孔施工
3) punching tool
冲孔工具
4) punch work
冲孔工作
5) Drilling
[英]['driliŋ] [美]['drɪlɪŋ]
孔加工
1.
Usually, afterprocessing is necessary for the lightweight composite components before assembling, such as drilling, cutting, slotting, etc.
轻质复合构件成型后,根据装配要求需要进行二次加工,如钻孔、切边、开槽等,尤其需要大量的孔加工。
2.
Drilling process of the ceramic composite component(ceramics/FRP/aluminum alloy),as an example of ceramics/FRP laminate composite component,was studied intensively.
以陶瓷复合构件(陶瓷/玻璃钢/铝合金层叠)为例,对陶瓷/FRP层叠复合构件的孔加工工艺进行深入研究。
3.
Experimental Investigation on Drilling Kevlar Fiber Reinforced Composite with Sintered Diamond Bits;
以正交铺设的Kevlar层合板为对象,采用烧结金刚石钻头对其孔加工进行试验研究。
6) deep-hole machining
深孔加工
1.
In view of some of the difficult points for machining the hanging pup joints used in directional wells, a special technology for deep-hole machining is developed.
针对650型定向井悬挂短节的加工难点,研究了特殊的深孔加工工艺。
2.
To rebuild normal turner into machine tool of deep-hole machining based on programmable logic controller (PLC) and AC frequency control technology, electrical control system of high performance machine tool was designed, which could realize self-turning.
基于可编程控制器(PLC)和交流变频调速技术把普通车床改造成深孔加工机床,设计了能实现自主切削的高性能机床电气控制系统,系统主要由PLC、变频器、触摸屏、步进电机及其配套的驱动器组成。
补充资料：施工企业技术组织措施计划(见施工企业技术)
施工企业技术组织措施计划(见施工企业技术)
technical and organize measurement plan in construction enterprise
施工企业技术组织措施杯茹”岑，~‘_:_，organize measurement plan in eonstruetionenterPrise)见施工企业技米管理基本制度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条