1) Equicohesive temperature
等结合温度
2) gradient isothermal crystallization
梯度等温结晶
1.
Testing results indicated that DSC fusion curve of samples prepared by means of gradient isothermal crystallization revealed multiple fusion peaks, good repetition of testing results, high differentiation between different samples facilitating a reliable fast appraisal of unknown quality of g.
通过等速降温结晶和梯度等温结晶两种方法对国内市场的几种主要燃气管用聚乙烯树脂进行DSC测试。
3) isothermal temperature
等温温度
1.
Effect of isothermal temperature on microstructure of semi-solid 2024 alloy during partial remelting;
等温温度对半固态2024合金部分重熔组织的影响
2.
Based on this principle,we have analized the isothermal temperature range in which thecracks are apt to arise.
ZGMn13钢水韧处理加热过程中不同等温温度将产生不同的显微组织，根据这个原理，分析了容易产生裂纹的等温温区，并推荐了最佳等温温度。
3.
The results compared with those obtained by conventional quenching and tem-pering,show that 300M steel transformed with isothermal temperature below Ms has a mix structure ofmartenite,lower bainite and retained astenite.
研究了四种含碳量、三种等温温度与力学行为的关系，并与淬火回火３００Ｍ钢进行比较得出，３００Ｍ钢在Ｍｓ点以下温度等温获得Ｍ＋Ｂ＿下＋Ａ＿Ｒ混合组织、超高强度和优良的韧性。
4) static isothermal crystallization rate
静态等温结晶速度
5) isothermal crystallization
等温结晶
1.
The Monte Carlo method simulating the effect of radii on isothermal crystallization of PEG fibers;
计算机模拟纤维半径对PEG等温结晶动力学参数的影响
2.
Rheological behavior of isothermal crystallization for high-density polyethylene;
高密度聚乙烯等温结晶的流变行为
3.
Simulation experiment for isothermal crystallization of polymers;
聚合物等温结晶过程的模拟实验
6) isothermal sintering
等温烧结
1.
The isothermal sintering kinetics of nanocrystalline Dy1-xSrxCoO3-y(x=0.
6)的等温烧结动力学,计算了烧结激活能,结果表明:在烧结初期,致密化机制主要为蒸发-凝聚传质;在烧结中期,致密化机制转为晶界控制。
补充资料：二次再结晶(见再结晶晶粒长大)
二次再结晶(见再结晶晶粒长大)
secondary recrystallization
erCI 201」le」Ing二次再结晶(seeondary reerystallization) 见再结晶晶杠长大。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条