1) release agent
脱模剂;隔离剂;剥离剂
2) parting compound
脱模剂;隔离剂
3) release agent
剥离剂
1.
The effects of crosslinking agent and release agent on softening point, melt index and temperature of viscous flow were discussed; The effects of color agent on charging property was investigated as well.
讨论了交联剂、剥离剂对色粉软化点、熔体指数、粘流温度的影响;对着色剂对色粉荷电性能的影响及与树脂分子间的作用进行了分析。
2.
In this paper the high performance release agent CE-04 was applied to the base sheet to obtain high gloss and make the coating layer easily attaching to the surface of cast drum under wet condition, and also provide excellent releasing ability of paperboard from cast drum under dry condition,thus improve runnability and efficiency of paper machine.
通过采用性能良好的CE-04剥离剂,使纸张涂层在湿状态下容易粘结在铸涂缸表面,形成很高 的纸面光泽度,而干燥后又赋予纸张卓越的剥离性能,从而提高了纸机的操作性能和生产效率;同时选 择了恰当的加入点,避免了铸涂卡纸因发生粘缸而引起的麻坑点、针孔等纸病,提高了成纸品质。
3.
This paper introduced the working principle of a release agent and an creping adhesive agent, as well as their application in BF 12 tissue paper machine.
介绍了剥离剂和黏合剂的作用原理及其在BF12卫生纸机中的应用。
4) anti stripping agents
抗剥离剂
1.
The method provides a quantitative, reliable method for evaluation of asphalt anti stripping agents.
为沥青抗剥离剂的评选提供一种定量、可靠的方法。
2.
In this paper,synthesis of asphalt anti stripping agents from tetraethylenepentamine(TEPA) and formaldehyde has been studied by orthogonal experiments.
利用正交试验对四乙烯五胺（ＴＥＰＡ）／甲醛合成沥青抗剥离剂进行了研究，优化了主要工艺条件；对合成反应中碱度的变化进行了探讨；通过红外谱图结构分析，表明产物中存在有—Ｃ＝Ｎ—Ｒ基团。
5) partition
[英][pɑ:'tɪʃn] [美][pɑr'tɪʃən]
隔离剂
1.
A series of copper-based catalysts containing different partitions were designed and prepared.
设计并制备了一系列添加隔离剂的铜基甲醇合成催化剂,测试结果显示,添加隔离剂γ-Al2O3对催化剂有明显的促进作用。
2.
Also, the mechanism of the artificial interlayer to control the fracture height is analyzed and the law of the partition movement in the fractures is studied.
并分析了人工隔层控制缝高的原理和裂缝内隔离剂输送规律,同时也提出了控制缝高技术的研究内容与发展趋势。
6) insulator
[英]['ɪnsə,leɪtə, 'ɪnsjə-] [美]['ɪnsə,letɚ, 'ɪnsjə-]
隔离剂
1.
The powdered styrene-butadiene rubber was prepared using styrene-butadiene rubber latex, pretreatment (agent), multi-insulator, compounded antioxidant, desalted water and etc.
将丁苯胶乳(SBR)、预处理剂、多元隔离剂、复配型防老剂、脱盐水等,按配方加入7。
补充资料：脱模剂
分子式：
CAS号：
性质：用于混凝土浇注前涂抹在施工用模板上，以使浇注后模板不致粘在混凝土表面上不易拆模，或影响混凝土表面的光洁度。其主要作用为在模板与混凝土表面形成一层膜将两者隔离开故又称隔离剂。其主要成分为乳化脂肪酸。或者其他乳化油类。表观为白色乳状液。
CAS号：
性质：用于混凝土浇注前涂抹在施工用模板上，以使浇注后模板不致粘在混凝土表面上不易拆模，或影响混凝土表面的光洁度。其主要作用为在模板与混凝土表面形成一层膜将两者隔离开故又称隔离剂。其主要成分为乳化脂肪酸。或者其他乳化油类。表观为白色乳状液。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条