1) minipump
['minipʌmp]
微型真空泵
2) large-scale vacuum
大型真空泵
3) 2BV6 vacuum pump
2BV6型真空泵
4) rotor profile curve of Roots pump
罗茨真空泵型线
5) vacuum pump in the pump room
泵房真空泵
6) vacuum pump oil
真空泵油
1.
Due to the adjustment of process,the HVIS500 base oil,which was always used to produce 100# vacuum pump oil in PetroChina Dalian Petrochemical Co.
中国石油大连石化分公司100#真空泵油的生产是以HVIS500基础油为原料进行的,由于生产调整,已经不再生产HVIS500基础油,而在生产3#扩散泵油时,分子蒸馏和薄膜脱气工序产生的拔头油,与HVIS400和HVI650基础油按一定比例调合而成的HVIS500基础油,经过生产小试以及实际生产,可以满足100#真空泵油要求。
2.
In accordance with the development of vacuum pump oil and the market requirements in recent years,on the basis of the current internal and foreign manufacture situation,the series products of mechanical vacuum pump oil which can meet the quality requirements are produced.
针对近几年真空泵油的发展及市场需求,根据国内外真空泵油生产情况,利用大庆高粘度指数石蜡基润滑油,经溶剂脱蜡等工序后作为真空泵油原料,生产出符合质量要求和客户满意的产品。
3.
The evaluation showed that this oil is better than the present vacuum pump oil in oil- water separativeness, oxidation stability, antirust and antifoaming properties, is suitable for lubricating machanismwhich steam is easy to get into its vacuum system.
用特定的原料油及工艺制成基础油，并添加评选出的粘度指数改进剂、抗乳化剂、抗氧化剂、防锈剂和减摩剂等凋合成耐水真空泵油。
补充资料：真空泵标准汇总
标准编号 | 标准中文名称 | 标准英文名称 |
GB/T13930-1992 | 水环真空泵和水环压缩机气量测定方法 | Methods for the measurement of volume flow of gas ofwater-ring vacuum pump and compressor |
GB/T13929-1992 | 水环真空泵和水环压缩机试验方法 | Methods of testing for water-ring vacuum pumps and compressors |
JB/T5971-1992(2005复审) | 单级多旋片式真空泵 | |
JB/T7266-1994 | 容积真空泵 性能测量方法 | |
JB/T7255-1994(2005复审) | 水环真空泵和水环压缩机 | |
JB/T8472.1-1996 | 蒸汽流真空泵性能测定 第一部分:抽气速率(体积流率)的测定 | |
JB/T8472.2-1996 | 蒸汽流真空泵性能测定 第二部分:临界前级压力的测定 | |
JB/T1246-1997 | 滑阀真空泵 | |
JB/T9808.1-1999 | 奶用真空泵 技术条件 | |
JB/T9808.2-1999 | 奶用真空泵 试验方法 | |
JB/T8106-1999 | 容积真空泵噪声测量方法 | |
JB/T8944-1999 | 单级旋片真空泵 | |
JB/T8107-1999 | 容积真空泵振动测量方法 | |
JB/T10134-1999 | 带真空泵交流发电机 技术条件 | |
JB/T53019-1999 | 油扩散真空泵 产品质量分等 | |
JB/T53022-1999 | 滑阀真空泵 产品质量分等 | |
JB/T53014-1999 | 单级多旋片真空泵 产品质量分等 | |
JB/T53018-1999 | 罗茨真空泵 产品质量分等 | |
JB/T53017-1999 | 旋片真空泵 产品质量分等 | |
JB/T53016-1999 | 往复真空泵 产品质量分等 | |
JB/T53299-1999 | 单级水环真空泵 产品质量分等 | |
JB/T53020-1999 | 油扩散喷射真空泵 产品质量分等 | |
JB/T53301-1999 | 两级水环真空泵 产品质量分等 | |
NF E51-291-1996 | 压缩机和真空泵.安全要求.第2部分:真空泵 | (Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.) |
NF E51-290-1996 | 压缩机和真空泵.安全要求.第1部分:压缩机 | (Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.) |
NF X10-501-1976 | 真空技术.词汇.真空泵 | (Vacuum technology. Vocabulary. Vacuum pumps.) |
ANSI/ASME PTC 9-1974 | 性能试验规范.容积式压缩机、真空泵和鼓风机 | (Performance Test Code - Displacement Compressors, Vacuum Pumps and Blowers) |
ANSI/UL 1450-2003 | 电动空气压缩机、真空泵和涂漆设备 | (Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment ) |
ASME PTC 9 Erratum-1972 | 容积式压缩机,真空泵和鼓风机.正误表 | (Displacement compressors, vacuum pumps, and blowers; Erratum) |
ASME PTC 9-1970 | 容积式压缩机,真空泵和鼓风机 | (Displacement compressors, vacuum pumps, and blowers) |
BS EN 1012-1-1997 | 压缩机和真空泵.安全要求.压缩机 | (Compressors and vacuum pumps - Safety requirements - Compressors) |
BS EN ISO 14847-1999 | 转式变容真空泵.技术要求 | (Rotary positive displacement pumps - Technical requirements) |
BS EN 1012-2-1997 | 压缩机和真空泵.安全要求.真空泵 | (Compressors and vacuum pumps - Safety requirements - Vacuum pumps) |
EN 1012-1-1996 | 压缩机和真空泵 安全要求 第1部分：压缩机 | Compressors and vacuum pumps - Safety requirements - Part 1: Compressors |
EN 1012-2-1996 | 压缩机和真空泵 安全要求 第2部分：真空泵 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
DIN EN 1012-1-1996 | 压缩机和真空泵.安全要求.第1部分:压缩机 | (Compressors and vacuum pumps, safety requirements - Part 1: Compressors; German version EN 1012-1:1996) |
DIN EN 1012-2-1996 | 压缩机和真空泵.安全要求.第2部分:真空泵 | (Compressors and vacuum pumps, safety requirements - Part 2: Vacuum pumps; German version EN 1012-2:1996) |
DIN 28432-1996 | 真空技术.膜片真空泵的验收规则 | (Vacuum technology - Acceptance specifications for diaphragm vacuum pumps) |
DIN 45635-13-1977 | 机器噪声测量.空气载声测量.包面法.空气压缩机包括真空泵（活塞式.涡轮式和喷射式压缩机） | (Measurement of airborne noise emitted by machines; enveloping surface method, compressors, vacuum pumps included (displacement-, turbo- and jet compressors)) |
DIN 28426-2-1976 | 真空技术.旋转活塞真空泵的验收规则.高真空范围内的摇杆式活塞真空泵 | (Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum) |
DIN 28400-2-1980 | 真空技术.名称和定义.真空泵 | (Vacuum technology; terms and definitions, vacuum pumps) |
DIN ISO 3019-3-1984 | 液压传动.变容真空泵和马达.装配法兰盘和轴端的尺寸及识别代码.第3部分:多边形法兰盘(包括圆形法兰盘) | (Hydraulik fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 3: polygonal flanges (including circular flanges)) |
DIN ISO 3019-2-1991 | 液压传动.变容真空泵和马达.装配法兰盘和轴端的尺寸及识别代码.第2部分:两孔与四孔法兰与轴端.米制系列 | (Hydraulic fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 2: 2 and 4-hole flanges and shaft ends, metric series; identical with ISO 3019-2:1986) |
DIN 28426-1-1983 | 真空技术.旋转真空泵.在近似真空和高真空范围内的闭塞阀真空泵和旋转阀真空泵的验收规则 | (Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum) |
DIN 28431-1987 | 真空技术.液体环式真空泵的验收规程 | (Vacuum technology; acceptance specifications for liquid ring vacuum pumps) |
DIN 28427-1983 | 真空技术.蒸气压低于1mbar的扩散泵和蒸气喷射真空泵的验收规则 | (Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar) |
DIN 28430-1984 | 真空技术.以蒸汽作为驱动介质的蒸汽喷射真空泵和蒸汽喷射压缩机用测量规则 | (Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid) |
JB/T6921-2004 | 罗茨真空泵机组 | |
JB/T8540-2004 | 水蒸汽喷射真空泵 | |
JB/T10462-2004 | 水喷射真空泵 |
JB/T7265-2004 | 蒸汽流真空泵 | |
UL 1450-2003 | 电动空气压缩机、真空泵和喷漆设备 | (Motor-operated air compressors, vacuum pumps, and painting equipment) |
JIS B8384-2000 | 液压.变容真空泵、机动泵和整体传动装置.稳态性能测定 | (Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance) |
JIS B8317-2-1999 | 蒸气真空泵.性能特性的测定.第2部分:临界后压力的测定 | (Vapour vacuum pumps --Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure) |
JIS B8323-2003 | 水封式真空泵 | (Water ring vacuum pumps) |
JIS B8317-1-1999 | 蒸气真空泵.性能特性的测定.第1部分:流量容积比率的测定(泵速) | (Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)) |
JIS B8385-2000 | 液压.变容真空泵、机动泵和整体传动装置.参数定义和字母符号 | (Hydraulic fluid power -- Pumps, motors and integral transmission -- Parameter definitions and letter symbols) |
JIS Z8126-2-1999 | 真空技术.词汇.第2部分:真空泵和相关条款 | (Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms) |
ISO 1607-2-1989 | 变容真空泵.性能特性测量.第2部分:极限压力的测量 | (Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure) |
ISO 16330-2003 | 往复式变容真空泵和泵装置.技术要求 | (Reciprocating positive displacement pumps and pump units - Technical requirements) |
ISO 3529-2-1981 | 真空技术.词汇.第2部分:真空泵和有关术语.三种语言版 | (Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition) |
ISO 1608-2-1989 | 蒸汽真空泵.性能特性的测量.第2部分:临界前级压力的测量 | (Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure) |
ISO 1608-1-1993 | 蒸汽真空泵.性能特性的测量.第1部分:容积流量速度的测量(泵速) | (Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)) |
QB/T1444-1992 | ZBK型轻式专用两叶罗茨真空泵 | |
QB/T1445-1992 | 湿式罗茨真空泵性能测试方法 | |
JB/T6533-2005 | 旋片真空泵 | |
JB/T7674-2005 | 罗茨真空泵 | |
JB/T7675-2005 | 往复真空泵 | |
GB/T19955.1-2005 | 蒸汽流真空泵性能测量方法 第1部分：体积流率(抽速)的测量 | |
GB/T19955.2-2005 | 蒸汽流真空泵性能测量方法 第2部分：临界前级压力的测量 | |
GB/T19956.1-2005 | 容积真空泵性能测量方法 第1部分：体积流率(抽速)的测量 | |
GB/T19956.2-2005 | 容积真空泵性能测量方法 第2部分：极限压力的测量 | |
JB/T8540-2004 | 水蒸汽喷射真空泵 | |
JB/T10462-2004 | 水喷射真空泵 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条