1) slide
[英][slaɪd] [美][slaɪd]
玻片;切片
2) glass slide
玻片
1.
Methods Modified glass slides were robotically printed with capture antibodies against monocyte chemoattractant protein 1(MCP-1),then dilutions of the cytokine were applied to the arrays and the protein was detected with biotin-labeled antibody coupled with Cy3-conjugated streptavidin.
目的:优化以琼脂糖修饰的玻片为载体的抗体微阵列的制备方法,提高微阵列信噪比及检测灵敏度。
2.
Objective To study on the ability of antibody microarray glass slide modified by silicate acid absorption on RBC blood group antibody(Anti-A,Anti-B,Anti-AB,Anti-D).
方法将玻片用硅酸钠溶液处理,经酸化以形成硅酸,然后用抗红细胞血型抗体(抗-A、抗-B、抗-AB、抗-D)包被,以对应红细胞作反应指示物,以检测经硅酸修饰后的玻片对红细胞血型抗体的吸附能力,以及血型抗体的免疫活性。
3) chip
[英][tʃɪp] [美][tʃɪp]
木片，切片
4) Slice
[英][slaɪs] [美][slaɪs]
切片
1.
The Reconfigurable Multifunction Laser Processing System Based on the Optimal Slice Process;
基于最优切片工艺的可重构多功能激光加工系统
2.
Data Optimization for Slice in Rapid Prototype Manufacturing;
快速成型的切片数据优化
3.
A Model of Defense Remote Buffer Overflow Attack Based On Slice Technology;
基于切片技术的远程缓冲区溢出攻击检测模型
5) chip
[英][tʃɪp] [美][tʃɪp]
切片
1.
Use of Polypropylene Chip in Winter;
关于聚丙烯切片在冬季中使用的探讨
2.
Study of Polypropylene Chip Used in Meltblown Nonwovens;
熔喷非织造布用聚丙烯切片的探讨
3.
Influencing factors on the color of fiber grade PET chip;
纤维级聚酯切片色度的影响因素
6) chips
[tʃips]
切片
1.
The paper briefly stated some new problems and deficiencies of the nylon chips line at home anddiscussed the resolvents of the problems giving a reference to the dicision makers of the enterprises.
简要论述了近期我国锦纶切片行业存在的一些弊端及不足，并对这些问题的解决办法进行了探讨，以供广大企业参考。
2.
The extraction temperature, bath ratio and the content of lower polymer in the aqueous solution at the upper extraction tower can affect the content of lower polymer in the produced chips .
介绍了从Ｉｎｖｅｎｔａ公司引进的锦纶６切片萃取装置的生产过程，分析了萃取温度、水浴比及萃取塔上段水溶液中低分子物浓度等对切片中低分子物含量的影响。
3.
The article sets forth some factors that influence on the consumption of FDY chips such as quality of chips, technology, equipment as well as scientific management.
本文从切片质量、工艺、设备、科学管理等几方面对涤纶ＦＤＹ消耗的影响因素进行了探讨，证明了切片质量直接影响ＦＤＹ的可纺性，工艺参数的合理选择、优质的筒管质量和良好的设备保养以及科学的管理方法可以减少丝的断头，提高生头的成功率，达到缩短空纺时间的目的，对降低消耗起着重要的作用。
补充资料：精子试管玻片凝集试验
精子试管玻片凝集试验
诊法。精子凝集试验之一。本试验可以观察凝集类型。操作方法：①血清样品在56℃下放置30分钟灭活，用Baker缓冲液稀释至1∶4。②用Baker缓冲液稀释新鲜高质量的精液至50×106精子/ml。③在一个小试管内，加入05ml血清样品和005ml精子悬浮液，在37℃下孵育，分别于1小时和2小时后从每个试管中取一滴混合液，放在玻片上，加盖片，在显微镜下观察。④计数每12个高倍视野中活动凝集精子数和活动自由精子数，两者之比≥10%为阳性，或计数100个活动自由精子所见到的凝集精子团数，如果凝集率≥8为阳性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条