1) American Standard Taper Pipe Thread
布氏锥管螺纹
2) cone-shaped thread
圆锥管螺纹
1.
There are many ways to measure base-level pitch diameter of cone-shaped thread.
检测圆锥管螺纹基面中径的方法有很多,但测量过程复杂。
4) pipe tap
管螺纹丝锥
5) taps for taper pipe threads
锥管螺纹丝锥
1.
This paper introduces the measuring principle,calculating formula and measuring method of the taps for taper pipe threads through the universal tool microscope.
本文介绍了锥管螺纹丝锥在万工显示上的测量原理、计算公式及测量方法。
补充资料：55°圆锥管螺纹型式和尺寸
| 螺纹代号 | 基本尺寸 英 寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 圆弧尺寸 r | 底孔尺寸 mm |
| R 1/16 | 1/16＂ | 7.723 | 0.907 | 28 | 7.142 | 6.561 | 0.581 | 0.125 | 6.4 |
| R 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 0.125 | 8.4 |
| R 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 0.184 | 11.2 |
| R 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.950 | 0.856 | 0.184 | 14.75 |
| R 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 0.249 | 18.25 |
| R 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 0.249 | 23.75 |
| R 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 0.317 | 30 |
| R 1 1/4 | 1 1/4＂ | 41.910 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 0.317 | 38.5 |
| R 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 0.317 | 44.5 |
| R 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 0.317 | 56 |
| R 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 0.317 | 71 |
| R 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 0.317 | 85.5 |
| R 4 | 4＂ | 113.030 | 2.309 | 11 | 111.551 | 110.072 | 1.479 | 0.317 | 110.5 |
| R 5 | 5＂ | 138.430 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 0.317 | 136 |
| R 6 | 6＂ | 163.830 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 0.317 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条