1) DOE experiment
DOE试验
1.
The optimum conditions(foaming temperature 115℃,saturatio pressure 15MPa and foaming time 1s ) were obtained according to DOE experiments results to achieve high open cell degree(61.
本课题首先以纯PLA为基体,采用快速降压法,运用DOE试验研究了三个主要工艺参数发泡温度、饱和压力和发泡时间对发泡过程的影响,并确定了试验空间内获得较高开孔度和较小表观密度的最佳工艺条件为发泡温度115℃、饱和压力15MPa、发泡时间:15s,在该工艺条件下获得了开孔率61。
2.
Gas-assisted molding parameters were opbimjzed by DOE experiments,through sorting the number of factors and their levels,the designed fit models were built and residuals were analyzed.
将DOE试验设计引入气辅注塑成型参数配置和优化中,通过遴选试验因子及其水平数量拟合选定模型,进行残差分析,优化成型参数,并用试验验证该方法可有效地消除注射缺陷。
2) DOE experiment design
DOE试验设计
1.
Investigation on optimizing the suspension polymerization formula for PVC by DOE experiment design;
运用DOE试验设计优化悬浮法PVC聚合配方的探索
3) Design Of Experiment(DOE)
试验设计(DOE)
1.
Optimization process of crankshaft induction hardening by design of experiment(DOE)
用试验设计(DOE)法优化曲轴感应淬火工艺
5) DOE-2 program
DOE-2程序
1.
Using the DOE-2 program developed by Lawrence Berkeley National Laboratory as calculation core, analyzing the influence of floor height and total architectural height for building shape coefficient in the region cold in winter and hot in summer, th.
应用美国劳伦斯伯克力国家实验室(LawrenceBerkeleyNationalLaboratory)开发的DOE-2程序为计算内核,分析住宅建筑层高、建筑总高度对冬冷夏热地区不同形式建筑的体形系数的影响,进而研究其对建筑采暖能耗、空调能耗和建筑总能耗的影响。
6) DOE analysis
DOE分析
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条