1) Porous alloy
多孔合金
2) porous aluminum alloy
多孔铝合金
1.
Compressive stress-strain behavior and energy absorption capability of porous aluminum alloy;
多孔铝合金的压缩应力-应变特征及能量吸收性能
2.
Effect of"through-hole"on porous aluminum alloy compressive mechanical properties
多孔铝合金连通孔对压缩性能的影响
3.
The compressive deformation behavior and energy absorption properties of the porous aluminum alloy fabricated by infiltration method was discussed in this paper.
采用渗流铸造工艺 ,制备了Al Si系多孔铝合金 ,讨论了其压缩变形特征及能量吸收性能 ,分别对ZL10 1、ZL111两种多孔铝合金进行T6热处理 ,研究了热处理对这两种多孔铝合金压缩吸能性能的影响。
3) porous NiTi alloy
多孔NiTi合金
1.
Internal friction behaviors of porous NiTi alloys with variable porosities
可变孔隙率多孔NiTi合金的内耗行为
2.
Strain field distribution, which was calculated from the changes of density and direction of moire at the margin and the center of pore wall, indicated that the failure of porous NiTi alloy can be attributed to the stress concentration near the margin of pore wall.
在外加压缩载荷的作用下,多孔NiTi合金的孔壁边缘和心部除承受压缩应力外,还承受较大的剪切应力作用。
3.
In this study,a detailed investigation had been made regarding the variation in internal frication and Young's modulus in porous NiTi alloys with different component and pore rates.
本文利用苏州职业大学测试技术研究所设计改进的LMR-1型低频力学驰豫谱测量系统(低频扭摆式内耗仪)强迫振动方式,在0℃~200℃温度范围内测量了不同成分和孔隙率NiTi合金的内耗和模量性质,为设计多孔NiTi合金在耗能减振方面的应用提供依据。
4) porous Al alloy
多孔铝合金
1.
Airflow noise attenuation capacity of porous Al alloy with small pore diameter
小孔径通孔多孔铝合金的防风降噪性能
2.
The effect of heat treatment and pore structure on compressive and energy absorption behavior of the porous Al alloy was investigated.
采用渗流法制备了具有通孔结构的ZL111基多孔铝合金,研究了固溶时效热处理和孔结构参数对多孔铝合金压缩性能和能量吸收特性的影响。
3.
A new type porous Al alloy with high specific strength had been produced with infiltration method by adding some elements, based on Al Si alloy.
在Al Si合金基础上 ,加入合金元素采用渗流法制备了高比强度的新型多孔铝合金 ,研究了孔结构参数、固溶时效处理对新型多孔铝合金的压缩吸能性能的影响。
5) porous TiNi alloy
多孔TiNi合金
1.
The size of the pores in porous TiNi alloy increased with the increasing of the size of element powders and the decreasing of the pressure.
采用氩气保护烧结制备了多孔TiNi合金 ,并用图像分析的方法对其孔隙和孔隙率进行了研究。
2.
In this paper, the influence of NH4HCO3 on the pore characteristics and mechanical properties of porous TiNi alloy were studied.
本文研究了NH4HCO3对多孔TiNi合金孔隙性能和机械性能的影响,根据实验结论制备了梯度多孔TiNi合金,并对其进行了性能测试。
6) porous TiZrNb alloy
多孔TiZrNb合金
1.
In this paper, powder metallurgy technique was employed to prepare porous TiZrNb alloy.
本文通过真空粉末烧结制备了多孔TiZrNb合金,采用图像分析法对其孔隙特征进行分析,从而研究了各因素对烧结制品孔隙的影响。
补充资料：氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
J氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条