1) V-belt type compound box
V带并车
1.
It owns such features: designed integral-transportation-unit in one,applied the joined V-belt type compound box,easy adjustments and instillations,good adaptability,extensive marketing prospects.
其特点是将整个并车系统设计成一个运输单元,采用联组窄V带并车,安装调整简单,有较好的适应性,具有广阔的市场前景。
2) V-belt
V带
1.
New Method for Calculating Rated Transmission Power of V-belt;
计算V带额定传动功率的新方法
2.
In this paper the cause of power insufficiency is analyzed,and several important formulas affecting the drive power are verified for the split V-belt CVT.
分析了分体式V带无级变速器传动功率不足的原因,验证了影响传动功率的几个重要公式,得出了在分体式V带传动无级变速器设计过程中可以使用的公式和限制使用的公式,并对限制使用的公式进行了修正,使其适用于新型V带无级变速器的设计。
3.
Introduced two models and advantage &defects of V-Belt substituted by narrow V-Belt, and compared from technical characteristics and economical characteristics ,pointed out three using method of V-Belt driving device substituted by narrow V-Belt.
介绍了V带换代产品窄V带的两种制式及其优缺点,并从技术性能及经济性进行了比较,指出了V带传动装置改用窄V带的3种使用方法。
3) V belt
V带
1.
A Pretiminary Study on Restriction to Angle of Contact on Small pulley in the Resign of V Belt Tranmission;
对V带传动设计中限制小带轮上的包角提出商榷
2.
The V belt is formed by either the positive or the opposite method.
通过对V带的各种成型工艺进行分析对比,指出了传统成型工艺的不足之处,分析了新式V带的成型工艺过程,提出合适的线绳排列位置和定量的定向短纤维是提高V带使用寿命的有效途径。
3.
Based on the deformation characteristics of the V belt ,a new method for the transmission and design of the belt and the deformation regulation of the belt in the wheel tank ,is proviede,making use of the experiment and mathemataics methods.
根据V带的变形特点,利用实验方法,并采用数学方法,给出V带在带轮轮槽中的变形规律,为带的传动与设计提供了新思路。
4) parallel operation
并车
1.
Study on the parallel operation course of electrical propulsion prime mover based on the combined power plant;
基于联合动力的电力推进原动机并车过程研究
5) parallel connection
并车
1.
In order to prevent from the current impacting on the power network during the marine generator units connected in parallel,which affects the normal operation of electrical equipments,the condition of parallel connection for the generator units are analyzed.
为避免船舶发电机组并车时,发生电流对电网的冲击,影响设备的正常运行,对并车条件进行分析,利用故障技术对并车过程进行诊断,便于轮机操作人员把握并车条件。
6) V-belt transmission
V带传动
1.
V-belt transmission optimized design based on MATLAB;
基于MATLAB的V带传动优化设计
2.
Considering the case which fiber separator V-belt transmission broke frequently, reliable design theory was applied to analyze its fatigue reliability and slip reliability, The reason of V-belt failure was found that it.
针对纤维分离机V带频繁发生断裂问题,运用可靠性设计理论对V带传动的不打滑可靠性和疲劳强度可靠性进行分析,找出了V带因疲劳可靠度不足而失效的原因,并提出了采用窄V带传动的改进方法。
3.
On the basis of the general design,this paper studied reliability optimal design of V-belt transmission.
在普通设计的基础上,研究了V带传动的可靠性优化设计。
补充资料：V带
分子式：
CAS号：
性质：简称V带或三角带，是断面为梯形的环形传动带的统称。与平型传动带相比，具有安装容易、占地面积小、传动效率高和噪音小等优点，在整个传动领域中占有重要地位。按其截面形状及尺寸可分为普通V带、窄V带、宽V带、多楔带等；按带体结构可分为包布式V带和功边式V带；按带芯结构可分为帘布芯V带和绳芯V带。主要应用于电动机和内燃机驱动的机械设备的动力传动。
CAS号：
性质：简称V带或三角带，是断面为梯形的环形传动带的统称。与平型传动带相比，具有安装容易、占地面积小、传动效率高和噪音小等优点，在整个传动领域中占有重要地位。按其截面形状及尺寸可分为普通V带、窄V带、宽V带、多楔带等；按带体结构可分为包布式V带和功边式V带；按带芯结构可分为帘布芯V带和绳芯V带。主要应用于电动机和内燃机驱动的机械设备的动力传动。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条