1) molding fall
浇注落差
1.
Based on the field simulation experiment,we study the influence of molding fall and level diffusion distance on the mechanical property of non-dispersible underwater concrete,which is compared with that of NUC molded on land,adopting drilled-core for test and analyzing based on regressive statistics.
通过室外水槽模拟试验,研究浇注落差及水平扩散间距对不分散混凝土力学性能的影响,并与陆地成型混凝土进行对比,采用钻芯法进行测试,并通过数理统计进行分析。
2) pouring
[英][pɔ:] [美][por]
浇铸，浇注
3) pouring
[英][pɔ:] [美][por]
浇注
1.
Closed Integration System for Melting and Pouring Magnesium Alloy
封闭式镁合金熔炼及浇注集成系统的研究
2.
The two 1080-m3 blast furnaces in the Ironworks successively went into operation at the end of 2005,the frontside main runner being of semi-pouring,semi-ramming mix.
莱钢炼铁厂银山前区2×1080m3高炉于2005年底相继投产,炉前主沟为半浇注、半捣打料混合主沟。
3.
HSLH serial pouring cooling feeding system can regulate mould cooling period and flexiblly choose shakeout range.
HSLH系列砂模浇注冷却输送系统,可调节铸型冷却周期,灵活选择浇注落砂区,液压传动平稳可靠,触摸屏操作PLC控制,机械手自动套箱压铁,故障自诊断。
4) casting
[英]['kɑ:stɪŋ] [美]['kæstɪŋ]
浇注
1.
Thermal and mechanical properties of casting polyurethane resin with heat resistance;
浇注型耐热聚氨酯树脂材料的热性能和力学性能
2.
The Study of Epoxy Resin Casting Technique for Dry-Type Transformer;
干式变压器环氧树脂浇注工艺探索
3.
To achieve the low superheat casting,a kind of cooling nozzle is developed.
为实现低过热度浇注,开发了一种冷却水口。
5) cast
[英][kɑ:st] [美][kæst]
浇注
1.
Application of New Binding Structure of Core Limb to Cast Dry-Type Transformer;
新型铁心柱绑扎结构在浇注型干式变压器中的应用
2.
Analysis of Environmental Protection Characteristics of Epoxy Resin Casting Dry-Type Transformer;
环氧树脂浇注干式变压器环保特性分析
3.
Cast Process of Winding in Epoxy Resin Cast Dry-Type Transformer;
环氧树脂浇注干式变压器的绕组浇注工艺
6) pour
[英][pɔ:(r)] [美][pɔr]
浇注
1.
It is further proposed to pour glass glue for the sealing during the process .
针对传统的牵引电动机定子主极、换向极装配中的工艺材料缺陷,提出了采用环氧树脂和聚酰胺树脂添加H级填充泥这种新的磁极装配材料的方法,该磁极装配材料一体化程度高、密封性强,可以有效地防潮、防接地;并提出工艺实施过程浇注玻璃胶密封。
补充资料：浇注
把金属熔液、混凝土等注入（模型等）。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条