1) high deformation resistance
抗大变形
1.
Influence of air-cooling relaxation on microstructure and properties of X70 pipeline steel with high deformation resistance
空冷弛豫对X70级抗大变形管线钢组织性能的影响
2) high deformability steel
抗大变形钢
1.
Furthermore,it also gives some summary about the integrity management,HTP rolling procedure,ductile fracture arrest of high grade steel,strain-based design,and development of high deformability steel.
针对完整性管理、高温轧制工艺(HTP)、高钢级管线钢的韧性止裂、基于应变的设计以及抗大变形钢的开发等做了概括性论述。
3) pipe steels with high deformation resistance
抗大变形管线钢
1.
Through discussions of strain-based design and analysis of pipe steels with high deformation resistance,it was put forward that strain-based design should be used for pipelines run in areas where geology disasters always occur,and sufficient deformation capability can be obtained through design measures or using of pipe .
重点对抗大变形管线钢的开发与应用进行了综合评述。
4) property of resisting large deformation
抗大变形性能
5) ability to resistance to great distortion
抗大变形能力
6) resistance of deformation
变形抗力
1.
Results showed that high temperature resistance of deformation of 4Cr13 is not changed by adding copper and sulphur.
研究表明,铜、硫的加入未引起4Cr13钢变形抗力的改变。
2.
The curve of stress-strain of Q345 is found and then the resistance of deformation is obtained in different conditions when σ-(0.
2作为材料的屈服极限值,得到不同条件下的变形抗力值。
补充资料：冷变形模具钢
分子式：
CAS号：
性质：制造在冷状态下使金属变形的模具用的工具钢，也称做冷变形模具钢或冷模钢。冷作模具钢应该具有高的硬度和耐磨性、高的强度和疲劳强度以及足够的韧性，还要有良好的工艺性能，如锻造性、切削加工性、淬透性、淬硬性，且热处理变形小。典型的冷作模具钢有：(1)碳素工具钢T8～T12；(2)9Mn2V、9CrSi、MnSi、CrWMn等；(3)高韧性的4CrW2Si、5CrW2Si、6Cr2Si等；(4)高淬透性、高耐磨性和淬火变形小的Cr12、Cr12V、Cr12MoV、Cr6WV、Cr4W2MoV和CrMn2SiWMoV等。
CAS号：
性质：制造在冷状态下使金属变形的模具用的工具钢，也称做冷变形模具钢或冷模钢。冷作模具钢应该具有高的硬度和耐磨性、高的强度和疲劳强度以及足够的韧性，还要有良好的工艺性能，如锻造性、切削加工性、淬透性、淬硬性，且热处理变形小。典型的冷作模具钢有：(1)碳素工具钢T8～T12；(2)9Mn2V、9CrSi、MnSi、CrWMn等；(3)高韧性的4CrW2Si、5CrW2Si、6Cr2Si等；(4)高淬透性、高耐磨性和淬火变形小的Cr12、Cr12V、Cr12MoV、Cr6WV、Cr4W2MoV和CrMn2SiWMoV等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条