1)  hydrogenic reactor
					
	
					
				
				
	
					
				产氢反应器
			
					2)  effluent from anaerobic hydrogen-producing reactor
					
	
					
				
				
	
					
				厌氧产氢反应器出水
				1.
					Taking effluent from anaerobic hydrogen-producing reactor as substrate,the cultivation process of aerobic granular sludge in a sequencing batch reactor(SBR) was studied.
						
						以厌氧产氢反应器出水为底物,在序批式反应器中研究了好氧颗粒污泥的培养过程。
					
					3)  Hydrogenation reactor
					
	
					
				
				
	
					
				加氢反应器
				1.
					Numeric simulation of transient temperature field on hydrogenation reactor;
					
					
						
						
					
						加氢反应器瞬态温度场数值模拟
					2.
					Application of narrow gap welding technique in thick-wall hydrogenation reactor;
					
					
						
						
					
						窄间隙埋弧焊在厚壁加氢反应器中的应用
					
					4)  hydroprocessing reactor
					
	
					
				
				
	
					
				加氢反应器
				1.
					Technology of Chinese hot wall hydroprocessing reactor and suggestions on its development in 21st century;
						
						我国热壁加氢反应器技术实力与下世纪发展建议
					2.
					Study on gas-liquid mixing and distributing system for hydroprocessing reactors
					
					
						
						
					
						加氢反应器气液混合分配系统浅析
					3.
					The causes of weld overlay cracking on hydroprocessing reactors and the effect on serviceability were analyzed in this paper.
						
						分析了加氢反应器堆焊层裂纹的成因与对使用的影响。
					
					5)  hydrogenated reactor
					
	
					
				
				
	
					
				加氢反应器
				1.
					Temper brittleness of Cr-Mo steel in hydrogenated reactor;
					
					
						
						
					
						加氢反应器用铬钼钢回火脆性
					2.
					Selecting Material of Hot Wall Hydrogenated Reactor and Its Temper Brittelness;
					
					
						
						
					
						热壁加氢反应器的选材及材料的回火脆性
					3.
					Quality control spots during the manufactur in g of hydrogenated reactor and coal liquefied reactor are introduced in the paper .
						
						本文介绍炼油厂的加氢反应器和煤液化反应器在监造过程中的质量控制 ,包括炼钢、锻造、热处理、焊接及各阶段的质量检验。
					
					6)  hydrogenation reactor
					
	
					
				
				
	
					
				氢化反应器
				1.
					Progress in suspended hydrogenation reactors and paked-bed hydrogenation reactors utilized in the hydrogen peroxide production by anthraquinone process to improve space-time yield and reaction selectivity is reviewed.
						
						综述了近年来蒽醌法生产过氧化氢用悬浮氢化反应器和固定床氢化反应器的研究进展。
					补充资料:加氢反应器
		分子式:
分子量:
CAS号:
性质:加氢装置中进行加氢反应的设备。在工艺上应满足:(1)反应物在反应器中分布均匀,与催化剂接触良好;(2)及时排出反应热,避免超温;(3)合适的反应器长径比,防止催化剂粉碎,避免催化床层压降过大。根据工艺特点分为固定床和沸腾床两种。
		
		分子量:
CAS号:
性质:加氢装置中进行加氢反应的设备。在工艺上应满足:(1)反应物在反应器中分布均匀,与催化剂接触良好;(2)及时排出反应热,避免超温;(3)合适的反应器长径比,防止催化剂粉碎,避免催化床层压降过大。根据工艺特点分为固定床和沸腾床两种。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条