2) electrolysis/flocculation -UASB-MBR combined technology
电解絮凝-UASB-MBR组合工艺
1.
Naproxen production wastewater was treated by electrolysis/flocculation -UASB-MBR combined technology.
采用电解絮凝-UASB-MBR组合工艺处理萘普生混合废水,研究结果表明,控制电压4。
3) MBR technology
MBR工艺
1.
Integrated Hospital Wastewater Treatment by MBR Technology;
MBR工艺处理综合医院污水
2.
Economic analysis of MBR technology in sewage recycling of station buildings;
MBR工艺在车站站房污水回用中的经济分析
4) anoxic-oxic MBR process
A/0-MBR工艺
1.
The affecting factors of denitrification is researched by anoxic-oxic MBR process at low emperature,the results of process indicated that at the low temperature A/O-MBR process can be achieved better denitrification.
研究了A/0-MBR工艺低温下(水温在5～12℃)缺氧段反硝化影响因素,结果表明:A/0-MBR工艺缺氧段有反硝化较好的反硝化效果,最佳pH值为7。
5) membrane bioreactor
MBR工艺
1.
This paper studied the membrane bioreactor (MBR) of Tianjin University Natatorium Reclaimed-water Reuse Project and monitored and recorded nearly its operation datas from May 1st 2004 to April 30th 2005 since the start-up date of the MBR.
本课题以天津大学游泳馆中水回用工程为平台,通过收集工程自2004年5月1日启动调试至2005年4月30日近一年的日常运行数据,总结了工程调试运行过程,分析了MBR工艺对污水中主要污染物的去除效果,并探讨了其去除机理。
6) MBR process
MBR工艺
1.
Experimental study on treatment of wastewater containing 50% seawater by MBR process
MBR工艺处理含50%海水的污水试验研究
2.
The experimental study was about the biological treatment of wastewater containing salt by MBR process.
主要对常温(18～25℃)高盐条件下MBR工艺有机物和氨氮去除效果的各影响因素进行了考察;研究了盐度变化对活性污泥性能以及对有机物和氨氮去除效果的影响;并对高盐下实现MBR工艺短程硝化的可行性及其稳定性进行了探索。
3.
The experimental study is about the influence factor of the treatment of wastewater containing high salt by MBR process.
采用MBR工艺对高盐度废水处理的影响因素进行研究。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条