1) heterogeneous denitration
异相脱硝
1.
With the further increase of oxygen volume fraction,coal char is ignited by combustion heat of gases,char temperature increases markedly,greatly accelerating the heterogeneous denitration,and then denitration efficiency,H2,CO and CH4 volume fractions begin to increase again.
氧体积分数进一步上升时,煤焦被气相燃烧热引燃,颗粒温度的大幅跃升促使异相脱硝反应增强,脱硝效率及H2、CO、CH4体积分数再次上升。
2) denitrification
[di:naitrifi'keiʃən]
脱硝
1.
Numerical simulation of different guide plates in selective catalytic reduction denitrification reactor of 600MW power plant;
600MW电厂SCR烟气脱硝反应器内不同导流板的流场数值模拟
2.
Studies on techniques of simultaneous aqueous desulfurization and denitrification;
液相同时脱硫脱硝技术研究
3.
Electron beam irradiation flue gas desulfurization and denitrification technology and model simulation;
电子束辐照烟气脱硫脱硝技术及模型模拟
3) denitration
[di:nai'treiʃən]
脱硝
1.
Discussion on the Reasonable Denitration Capacity of Thermal Power Plant;
火电厂烟气脱硝容量的合理性探讨
2.
The development of desulphurization,dust abatement,and denitration technology of glass furnace;
玻璃熔炉烟气脱硫、除尘、脱硝技术开发
3.
General Layout of Denitration Liquid Ammonia Storage in Coal Fired Power Plant;
火电厂脱硝液氨贮存设施总布置问题探讨
4) de-NO_x
脱硝
1.
The principle,performance and the factors of new SCR De-NO_X technology as well as its real working system are introduced.
介绍了SCR系统脱硝新技术的原理、性能及其影响因素、实际的工艺系统及其副产品的回收方式等,为电厂进行改造提供一些指导。
2.
The probing experiment on De-NO_x by pulsed plasma and NH_3 has also been performed.
本文探讨了脉冲电晕等离子法脱硫脱硝的基本原理,较系统地研究了影响脉冲电晕等离子烟气脱硫脱硝的主要因素,进行了加NH_3脱硝的探索试验。
3.
This paper introduces the selection,storage,manufacture and supply of the agent for de-NO_x,as well as the principle of SCR.
介绍SCR的反应原理,加装SCR所需要的脱硝剂的选择、贮存、制备、运输和供应。
5) NO_X reduction
脱硝
1.
NO_x reduction by aqua ammonia injection at 2.11 MW tangential pulverized fired boiler;
2.11兆瓦燃煤四角炉喷氨水脱硝试验
2.
After reviewing briefly on the present techniques with the recycle of waste tires, the author proposed the use of waste tires as a fuel to reduce both air emission and solid waste by applying tires as a reburning fuel for NO_X reduction.
利用国内生产技术以废旧轮胎大规模生产胶粉用于燃煤锅炉的再燃脱硝,能够很好地解决我国目前越来越多的废轮胎的生产现状,并把它们能源资源化利用,而且在利用过程中避免了再生胶、热能、热解利用等过程的二次污染问题。
6) DeNOx
脱硝
1.
Study on DeNOx Performance of Honeycomb V_2O_5-WO_3/TiO_2 Catalysts;
蜂窝状V_2O_5-WO_3/TiO_2催化剂脱硝性能研究
2.
Simulation of Effect of Non-uniformity of Reagent Distribution on SCR DeNOx Performance;
还原剂分布不均匀对SCR脱硝性能影响的模拟分析
3.
Experiment Study on SCR DeNOX Behavior of V_2O_5-WO_3/TiO_2 Catalysts;
V_2O_5-WO_3/TiO_2基催化剂SCR法脱硝试验研究
补充资料：脱硝
分子式：
CAS号：
性质：去除或取代化合物中硝酸根的过程。常见的脱硝方法有热分解、还原分解和电解等。用加热方法使硝酸盐分解的方法称为热分解脱硝。工业中常用的有流化床脱硝和微级脱硝。用化学还原剂也可以使硝酸盐溶液脱硝，如甲醛脱硝、甲酸脱硝、蔗糖脱硝等。在泛燃料后处理中蒸浓硝酸溶液时常用甲酸脱硝。电解脱硝也可用于核工业。
CAS号：
性质：去除或取代化合物中硝酸根的过程。常见的脱硝方法有热分解、还原分解和电解等。用加热方法使硝酸盐分解的方法称为热分解脱硝。工业中常用的有流化床脱硝和微级脱硝。用化学还原剂也可以使硝酸盐溶液脱硝，如甲醛脱硝、甲酸脱硝、蔗糖脱硝等。在泛燃料后处理中蒸浓硝酸溶液时常用甲酸脱硝。电解脱硝也可用于核工业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条