1) flue gas temperature in furnace
炉膛烟气温度
2) outlet flue gas temperature of furnace
炉膛出口烟气温度
3) furnace gas
炉膛烟气
4) furnace temperature
炉膛温度
1.
Applying the new technique of rich oxygen burning,improving and saving energy,discusses the advantages of the technique of rich oxygen burning at present, by elevating the furnace temperature, decreasing smoke heat loss, and avoiding the atmosphere pollution from nitrogen,also points out the way when disposing the hot side of boiler, and put forward the new way of new boiler product development.
从提高炉膛温度、减少排烟热损失和消除氮氧化物对大气的污染等三个方面论述了富氧燃烧新技术的优越性。
2.
Through simulating the influence of various ratio of primary and secondary air,position of upperlevel secondary air,coefficient of excess air,upon furnace temperature of the CFB boiler,and distribution of SO_2 and NO_x emission,the reasonable optimality of operational parameters has been a.
通过模拟不同一二次风比例、上级二次风位置、过量空气系数对CFB炉膛温度、SO2及NOx排放分布的影响,分析运行操作参数合理性,为440 t/h CFB锅炉的运行优化提供理论依据。
3.
With increased rear-arch and used high temperature and pressure steam as the secondary air,the furnace temperature and combustion efficiency was increased and the carbon particle s staying in furnace was also prolonged in addition to a good economic and social benefit.
对抛煤机锅炉的燃烧特点和存在的问题进行了分析,采取增设后拱和用高温、高压蒸汽作二次风的改造措施,提高了炉膛温度和燃烧效率,延长了碳颗粒在炉膛内停留时间,取得了较大的经济效益和社会效益。
5) flue temperature at furnace outlet
炉膛出口烟温
1.
Slag will happen if the flue temperature at furnace outlet is over high, however, the adoption of tower arrangement for boiler can increase the flue temperature at furnace outlet and avoid the slag on heating surface.
提高锅炉炉膛出口烟温可以减少对流受热面的布置及降低金属耗量,炉膛出口烟温过高将导致受热面结焦,采用塔式布置的锅炉可以提高炉膛出口烟温并且不致使受热面结焦。
6) furnace flue gas analysis
炉膛烟气分析
补充资料：炉膛
1.炉子里面烧火的地方。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条